Operation Summary

pro800w.qxp 4/30/2010 9:01 AM Page 25

In Review.

•Never attempt to operate your Whistler inverter from any power source other than a 12 volt battery or series of batteries that total 12 volts.

•This inverter is designed to be connected to the power source with the supplied cables or larger cables that properly match the distance from the battery. When utilizing the supplied cables, do not attempt to modify or lengthen them.

•Always make certain that the power cable terminal connections Negative (-) to Negative (-) and Positive (+) to Positive (+). Check these connections frequently to ensure that they are secure.

•Make certain the rated power consumption of the appliance or equipment you wish to operate is compatible with the capacity of your inverter.

•If the rated power consumption of the equipment is in the range of the maximum specified wattage of your converter, test the inverter to ensure that it will operate properly.

•This inverter is not designed to operate heat generating appliances such as coffee makers, irons, hair dryers, toasters and heaters.

•Before attempting to use a battery charger see page 14.

OPERATION SUMMARY

•Before attempting to use medical equipment see page 6.

•When operating the inverter with the engine off, start the engine every hour and let it run for at least 10 minutes to recharge the battery.

•In the event of automatic shut down, turn the inverter OFF

(O)immediately. Do not restart the inverter until the source of the problem has been identified and corrected.

•To avoid battery drain, always disconnect the inverter when not in use.

•Do not expose the inverter to moisture.

•Avoid placing the inverter near sources of heat or in direct sunlight.

•When in use, make certain that the inverter is properly ventilated.

•Do not use the inverter near flammable materials, fumes, or gases.

•Always operate the inverter in accordance with the instructions in this manual. Failure to do so may result in property damage, personal injury, or loss of life.