Care and Maintenance, Troubleshooting | Vector VEC1043 instruction

VEC1043_ManualEN_091505 1/17/06 5:49 PM Page 6

Operating Tips

Rated Versus Actual Current Draw of Equipment

Most electrical tools, appliances and audio/video equipment have labels that indicate the power consumption in amps or watts. Be sure the power consumption of the item you wish to operate is rated at 750 watts or less. (If the power consumption is rated in amps AC, multiply by the AC volts (115) to determine the wattage).

The inverter has overload protection, so it is safe to try to operate equipment rated at 750 watts or less. The inverter will shut down if it is overloaded.

Resistive loads are the easiest for the inverter to operate. However, large resistive loads, such as electric stoves or heaters usually require more wattage than this inverter can deliver on a continuous basis. Inductive loads, such as TVs and stereos require more current to operate than do resistive loads of the same wattage rating.

Induction motors, as well as some televisions, may require two to six times their wattage rating to start up. The most demanding in this category are those that start under load, such as compressors and pumps.

Testing is the only definitive way to determine whether a specific load can be started and how long it can run.

CAUTION

This inverter will not operate high wattage appliances or equipment that produces heat, such as hair dryers, microwave items, or toasters.

Battery Operating Time

With a typical vehicle battery, a minimum operating time of 2 to 3 hours can be expected. In most instances, 5 to 10 hours of operating time is achievable. However, Vector recommends that the operator start the vehicle every half hour to recharge the battery system. This will guard against any unexpected shut-down of the equipment and will ensure there is always sufficient battery capacity to start the vehicle’s engine. The inverter will sound its alarm when DC voltage drops below 11.0 volts.

The inverter may be used whether or not the vehicle’s engine is running. However, the inverter may not operate while the engine is starting since the battery voltage can drop substantially during cranking.

The inverter draws less than 0.7 ampere from the battery when it is not supplying power to a load and ON/OFF Pushbutton is in ON position. In most instances, the inverter can be left connected to the battery when not in use since it draws so little current. However, if the vehicle is to remain unused for several days, disconnect the inverter from the battery.

CARE AND MAINTENANCE

Storage

1.Ideal storage temperature range is 50-68°F (10-20°C).

2.Store and use the inverter in a cool, dry place with adequate ventilation.

3.Avoid locations that are exposed to heating units, radiators, direct sunlight or excessive humidity or dampness.

Maintenance

This unit contains no user-serviceable parts. It is recommended that the unit be returned to manufacturer for service (see the Warranty for repair/replacement policy and contact information).

Fuse Replacement

This power inverter is equipped with multiple internal fuses. Normally, these fuses will not blow unless there is a serious problem inside the unit. Internal fuses are replaceable, however, only electronically knowledgeable people should attempt fuse replacement. If the unit is damaged during fuse replacement, the warranty may be voided. Vector recommends contacting Technical Support for guidance. Call toll free: (866) 584-5504.

TROUBLESHOOTING

Common Audio/Visual Problems

“Buzzing” sound in audio systems

Some inexpensive stereo systems and “boom boxes” emit a buzzing sound from their speakers when operated from the Power Inverter. This occurs because the power supply in the electronic device does not adequately filter the modified sine wave produced by the inverter. The only solution to this problem is to use a higher quality sound system that incorporates a higher quality power amplified supply.

Television Interference

The Inverter is shielded to minimize interference with TV signals. However, in some instances, some interference may still be visible, particularly with weak TV signals. Try the following corrective measures:

•Position the inverter as far as possible from the television, the antenna and the antenna cables. Use an extension cable, if necessary.

•Adjust the orientation of the inverter, the antenna cables and the TV power cord to minimize interference.

•Make sure the antenna feeding the television provides an adequate (“snow free”) signal and that high quality, shielded antenna cable is used.

VEC1043 specifications

The Vector VEC1043 is a versatile and robust electric commuter bicycle specifically designed for urban environments. This innovative e-bike combines practicality with modern design, making it an ideal choice for city dwellers seeking an eco-friendly transportation solution.

One of its standout features is the powerful 250W brushless motor, integrated into the rear wheel hub, providing smooth and efficient power assistance. This motor ensures that riders can easily tackle inclines and longer distances without excessive exertion, making daily commutes efficient and enjoyable. With a pedal-assist system, the VEC1043 allows riders to choose their level of support, enabling a customizable riding experience based on personal preferences and fitness levels.

The VEC1043 is equipped with a high-capacity lithium-ion battery that provides an impressive range of up to 50 miles on a single charge. This battery can be conveniently charged in under 4 hours, making it perfect for those who need to recharge between rides. Additionally, the bike offers a battery management system designed to enhance longevity and efficiency, ensuring that cyclists can rely on their bike for years.

In terms of construction, the VEC1043 features a durable aluminum frame, balancing strength with lightweight properties for easy maneuverability. The bike’s ergonomic design includes an adjustable seat and handlebars, providing a comfortable ride for various rider heights.

Safety is a priority for the VEC1043, which is equipped with front and rear LED lights for enhanced visibility during nighttime rides. The bike also features a reliable braking system, comprising mechanical disc brakes that offer consistent stopping power in diverse weather conditions, ensuring the rider's safety at all times.

The VEC1043 comes with a user-friendly LCD display that shows essential riding data, including speed, distance, battery level, and assistance level. This intuitive interface allows riders to easily monitor their journey, enhancing the overall riding experience.

Overall, the Vector VEC1043 is a well-rounded electric bike that offers an efficient, practical, and enjoyable riding experience. With its combination of advanced technology, durable construction, and thoughtful features, it caters to the modern commuter's needs, making it an excellent choice for those looking to embrace sustainable transport options.