Once the forestay is connected, the mast step link must be disengaged.
TRAPEZE WIRES
,
FIGURE 30
FIGURE 31
Assemble the trapeze adjustment components as shown in the illustration. The shock cord should pass
beneath the trampoline frame from the port trapeze line to the starboard line. Note: Insure that these
items are assembled exactly as above. Refer to knot diagram, "Bowline Knot," on page 2.
FIGURE 32
Trapeze assembly installed. CAUTION: Never allow the trapeze wires to carry any mast loads intended for the shrouds.
13