Graco 239887, 239877, 239888 warranty Symbols, Equipment Misuse Hazard

Page 2

Symbols

Warning Symbol

WARNING

This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.

Caution Symbol

CAUTION

This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.

WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.

DThis equipment is for professional use only.

DRead all instruction manuals, tags, and labels before you operate this equipment.

DUse the equipment only for its intended purpose. If you are not sure, call your Graco distributor .

DDo not modify this equipment.

DCheck equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated component in your system. This equipment has a 8400 psi (58 MPa, 580 bar) maximum working pressure at 140 psi (0.97 MPa, 9.7 bar) maximum incoming air pressure.

DUse fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical Data section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.

DHandle hoses carefully. Do not pull on hoses to move equipment.

DRoute hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 66_C (150_F) or below –40_C (–40_F).

DDo not move or lift pressurized equipment.

DComply with all applicable local, state, and national fire, electrical, and safety regulations.

2308883

Image 2
Contents Table of Contents 308883Symbols Equipment Misuse HazardInjection Hazard Fire and Explosion Hazard Mounting InstallationGrounding Air and Fluid Line and Accessories Startup Pressure Relief ProcedureOperation Relieve pressure TroubleshootingProblem Cause Solution Displacement Pump Service Do not use slots in shovel tube to tighten or loosen tube Air Motor and Throat Service Disassembly9040A Reassembly Cutaway ViewParts Drawing Model No , pail lengthParts List Part No. Description QtyPage Mounting Hole Layout Dimensional DrawingsTechnical Data Graco Phone Number WarrantyExtended Product Warranty Toll Free