ACR Electronics MS-2000(M) manual Preventive Maintenance Checks, Alignment

Page 10

Battery preventive maintenance visual checks will be performed during initial and periodic inspections of the light.

4. Preventive Maintenance Checks

WARNING: Do not perform preventive maintenance in a flammable atmosphere or near an open flame.

a.MS-2000(M) Distress Marker Light

(1)Check that the xenon flash tube lens is not cracked or discolored.

(2)Check both the main body and flashguard shield cases for cracks or excessive abrasions.

(3)Check for full and free operations of both the IR and Blue light filters.

(4)Check that the IR and Blue filters are not cracked and discolored.

(5)Check that the light switch moves up and down freely.

(6)Check that the battery wells are free of dust and are clean.

b.BA-3058/U Battery (or equivalent) 1.5V, AA, Alkaline.

(1)Check the battery case for cracks, swelling or leakage. Replace as necessary.

(2)CAUTION: Do not mix different battery brands.

(3)CAUTION: Do not mix old and new batteries.

(4) CAUTION: Do not mix different battery types, e.g., lithium and alkaine.

(5)Replace batteries if device is used on a mission or annually.

5. Alignment

No alignment procedures or special inspection requirements must be performed on the MS-2000(M).

6. Periodic Inspection Requirements

Normally the MS-2000(M) and associated batteries will be inspected concurrently with other equipment installed in aircraft/ejection seat survival kits, aircrew survival vest or other special requirements. Such inspection intervals will be as specified by respective MAJCOM/agency life support directives. Periodic inspections will include both flash rate and preventative maintenance checks. See previous sections for details. Record inspection dates per MAJCOM/agency procedures and directives.

Y1-03-0146E

9

Image 10
Contents Page About Cobham Life Support, ACR Products About Cobham plc Table of Contents Section ONE- General General CharacteristicsPurpose Theory of Operation Section TWO- Operating Instructions IR light Stored Turn On Light Leakage Test Section THREE- Testing and MaintenanceFlash Rate Test a. Initial Maintenance Requirements Test Equipment and ToolsAlignment Preventive Maintenance ChecksPeriodic Inspection Requirements Parts Replacement Procedures a. To replace flashguard Appendix a WARRANTY, Useful Life POLICY, Notices Limited Warranty

MS-2000(M) specifications

The ACR Electronics MS-2000(M) is a state-of-the-art survival radio beacon designed to ensure the safety of individuals at sea and in remote locations. This device is a beacon that transmits distress signals to search and rescue (SAR) authorities, facilitating fast response times during emergencies. One of its standout features is its compliance with the international Cospas-Sarsat distress beacon standards, ensuring reliability and effectiveness for users worldwide.

One of the main characteristics of the MS-2000(M) is its Dual Frequency capability. It transmits on 406 MHz and 121.5 MHz frequencies, allowing for long-range detection by satellites while still being picked up by conventional receivers during proximity searches. This dual capability significantly enhances the chances of a successful rescue.

The MS-2000(M) is designed to be both rugged and compact, weighing only 1.5 pounds and featuring an IP68 waterproof rating, which means it can withstand harsh marine environments. Its versatile design allows for easy attachment to life vests, lifeboats, or even personal carry bags, ensuring it is always accessible when needed. The unit also incorporates a built-in GPS, which provides accurate location data, further aiding SAR teams in pinpointing the exact position of the beacon.

Another significant technological advantage of the MS-2000(M) is its exceptional battery life. The device is equipped with a lithium battery that can last up to 48 hours in an activated state, ensuring prolonged transmission of distress signals. Additionally, the beacon features a self-test function, confirming that the unit is operational and ready for use at a moment's notice.

Moreover, the MS-2000(M) is designed with user-friendliness in mind. It includes a simple activation process that can be conducted even in high-stress situations, ensuring that individuals can send out distress signals promptly. The beacon is also compatible with various mounting options, providing users with flexibility depending on their specific needs.

Overall, the ACR Electronics MS-2000(M) is an essential piece of safety equipment for anyone who ventures into open waters or remote areas. Its advanced features, robustness, and reliable technology make it a trusted companion for sailors, adventurers, and aviation personnel alike. By investing in the MS-2000(M), users are equipping themselves with a powerful tool designed to save lives in emergency situations.