Ingersoll-Rand AF1260-XX Description, 101, 66507-1 109, Y11-8-C, Cylinder 96941, 96917 129, 96858

PARTS LIST / AF1260-XX

Item	Description		(Qty)	Part No.	[Mtl]
101	Base & Bearing		(1)	66507-1	[A]
109	Nut (1/2” - 20)		(8)	Y11-8-C	[C]
111	O-Ring(1/8” X 11 3/4” o.d.)		(2)	Y325-277	[B]
112	Cylinder		(1)	96941	[Ef]
113	O-Ring(1/16” X 3/4” o.d.)		(4)	Y325-24	[B]
114	Tube		(1)	96872	[C]
*115	Rod		(1)		[SS]
116	O-Ring(1/4” X 12” o.d.)		(1)	Y325-452	[B]
*117	Piston		(1)		[A]
*119	Bushing		(1)		[C]
*120	Trip Rod Assembly		(1)		[A]
121	Bolt (1/2” - 20 x 10 1/4”)		(8)	94046-1	[C]
122	Head Plate		(1)	96863	[A]
123	O-Ring(3/32” X 1/2” o.d.)		(1)	Y325-109	[B]
124	O-Ring(1/16” X 2” o.d.)		(1)	Y325-32	[B]
125	Cap		(1)	96897	[D]
126	Sleeve		(1)	96901	[Br]
127	Ground Lug		(1)	96878	[Bz]
128	O-Ring(1/16” X 1 11/16” o.d.)		(1)	96917	[B]
129	Snap Ring (1.180” o.d.)		(1)	Y147-7	[C]
130	Washer		(1)	96894	[C]
131	Pin		(1)	96895	[C]
132	Driver		(1)	96868	[C]
133	U-Cup(3/16” X 1 1/2” o.d.)		(1)	96908	[B]
134	Spool		(1)	96875	[A]
135	Vent Bushing		(1)	96896	[D]
136	U-Cup(5/32” X 1 3/8” o.d.)		(1)	96907	[B]
137	Tube		(1)	96871	[C]
138	Socket Head Screw (5/16”-18 X 1”)		(9)	Y99-52	[C]
140	Head Manifold		(1)	96858	[A]
141	Major Gasket		(1)	96900	[B]
142	Valve Plate		(1)	96884	[CK]
143	D-Valve		(1)	96889	[D]
144	Valve Housing		(1)	96866	[A]
145	Socket Head Screw (5/16”-18 X 4 1/2”)		(2)	Y99-516	[C]
146	Pilot Insert		(1)	96882	[D]
147	Pilot Valve Plate		(1)	96883	[CK]
148	Pilot Gasket		(1)	96899	[B]
149	Vent Plug		(1)	96906	[D]
150	Pilot Cover		(1)	96865	[A]
152	U-Cup		(1)	Y186-24	[B]
153	Washer		(1)	92216	[Br]
154	Snap Ring		(1)	Y147-237	[C]
155	Muffler		(1)	96916	[C]
201	Muffler Kit (Optional, See Fig. 4)		(1)	67445-5	[C]
202	Regulator / Shut-Off(Optional, See Fig. 4)		(1)	67442
*203	Piston Assembly	(Includes items 115, 117, 119	(1)	67499
	and 120)
	Lubriplate FML-2 Grease Packet (1/4 oz.)		(2)	94276

Items included in Service Kit (637489).

For simplification of ordering and stocking, the Universal Ser- vice Kit contains service parts that can be used for every size of air motor. When repairing the motor, use only the parts that are needed for that specific motor. Extra service parts from the kit will remain after repair of the air motor.

TORQUE REQUIREMENTS 

NOTE: DO NOT OVERTIGHTEN FASTENERS.

Tighten (109 & 121) to 10-15 ft-lbs (13.6-20.3 Nm)

Tighten (138 & 145) to 50-60 in-lbs (5.6-6.8 Nm)

LUBRICATION / SEALANTS

NOTE: Lubricate with Grease (ARO p/n 94276).

	149	145
138		144	142�
			�
150	147	143
			141�
�148	�
					155
	�136
146	135	138			138
�
	134
		133�		140
	131
		132
	130
	�128	129	127
121	126		113�
	125
	�124		137
			113
	�123
			�
	122			113 �
				137
			111�	113	�
			116 �
*203			117
Not User
Serviceable		119
		120
		115
			112
	154
	�152	153
	�111		TORQUE SEQUENCE
			7	5
	101		2		3
109			4		1
Figure 2			6	8

Page of 4 AF1260-XX (en)