Browning OtN Series 2000 manual One-Piece Splined Coupling Type UE and U

Page 5

OtN Series 2000

Gearmotors and Reducers

One-Piece Splined Coupling (Type UE and U)

A

56C, 140TC

MOTOR

A

"O" RING

180TC - 280TC

MOTOR

Notes:

1.Install motor shaft key onto motor shaft.

2.Lubricate spline teeth of coupling and input shaft with Mobil grease XTC or equivalent coupling grease.

3.Install coupling onto motor shaft and set to the specified distance.

Refer to table below (dimension "A") for correct setting distances.

4.Apply thread locking compound to set screw and install. Tighten into coupling.

5.Assemble motor to gear reducer engaging splined coupling and bolt the motor to the c-face.

	Input	Reducer Size	Motor	A
	Input		Motor	A
	Type	OtN	Size	(Inches)
		OtN

	UE	22, 23	56C, 140TC	3.06

			180TC, 210TC	4.04
			180TC, 210TC	4.04

			56C, 140TC	3.12

	UE	24, 25	180TC, 210TC	4.11

			250TC	4.75
			250TC	4.75

			280TC	5.64

			140TC	3.86

	U	26	180TC, 210TC	5.34

			250TC	5.34
			250TC	5.34

			280TC	6.31

5

Image 5

Contents 8608 Revised January R MMaintenance Installation InstructionsGearmotors and Reducers Start-UpGearbox Position defined by a letter Position of Plugs and BreathersStandard Synthetic Gear Oil Triple Reduction and Combined U.S. QuartsAcceptable Mineral Oil Lubricants Gear Mounting Positions Frame Size Prim SecOne-Piece Splined Coupling Type UE and U Driven Shaft Specifications Face AssemblyDouble output shaft left and right side Mounting InformationDescription Qty OtN Part ListInput Shaft with Backstop OtN 27Description Qty AD Backstop Kit Description QtyDescription Maintenance Parts Gear Motor BearingsOtN 27 Quantity Per Unit FrameSize Face Input AP Input Shaft AD Backstop Assembly OtN 207 Maintenance PartsFace Quill Input Reducers OtN 2425x40x8 AS OtN 2220x30x7 AS 20x30x7 AS BWX133590A6TD Maintenance Parts OtN Part Number SizeGearmotors OtN Series