Radio-frequency interference 1.4.1 General, Cables

IntelliGear Plus™ Variable Speed MD Gearmotors

1.4- Radio-frequency interference: 1.4.1 - General

Variable speed drives use high-speed switches (transistors, semi-conductors) which switch high voltages (around 660V for 3-phase drives) at high frequencies (several kHz). This provides better efficiency and a low level of motor noise. As a result, they generate radio-frequency signals which may disturb operation of other equipment or distort measurements taken by sensors:

•due to high frequency leakage currents which escape to ground via the stray capacity of the drive/motor cable and that of the motor via the metal structures which support the motor

•by conduction or feedback of R.F. signals on the power supply cable; conducted emissions

•by direct radiation near to the main supply power cable

or the drive/motor cable: radiated emissions

These phenomena are of direct interest to the user. The frequency range concerned (radio-frequency) does not affect the energy distribution company.

1.4.2 - Standards (Emission)

The maximum emission level is set by (EN 50081-2) and (EN 50081-1). IntelliGear Plus conforms to:

•EN 50081-2 as standard

•EN 50081-1 with filter option

1.4.3 - Standards (Immunity)

The maximum immunity level is set by (EN 50082-2) and (EN 50082-1). IntelliGear Plus conforms to:

• EN 50082-2 and EN 50082-1 as standard

1.5 - Description of cables and protection devices (Customer Supplied)

NOTICE: When using a circuit-breaker, it must be a motor circuit-breaker (D curve).

•Comply with the size of protection fuses.

•The cable size may vary according to legislation applicable in the country, which will take precedence over the values given in the table below without exception.

Motor	115V Single Phase Power Supply				230V Single Phase Power Supply
HP Rating
HP Rating	IntelliGear	Input Amps	Wire Gauge	Fuse Size	IntelliGear	Input Amps	Wire Gauge	Fuse Size
	Plus Number				Plus Number
0.50	I 310M 050	5	14AWG	10 A	I 31M 050	2.5	14AWG	8A

1.6 - UL conformity

1.6.1 Specified mains supply

The drive can be incorporated in an installation with short circuit capacity of 5000 A rms maximum at voltage 264 VAC rms maximum for 230 V (TL) drives or 528 VAC rms maximum for 400 V (T) drives.

1.6.2 Cables

Only class 1 copper cables 60/70° C (140/167° F) should be used.

1.6.3 Fuses

UL conformity is adhered to if the fuses are UL-listed, fast-blow fuses (class CC up to 30 A) with a rating as indicated in the above table and if the short-circuit symmetrical current does not exceed 5 kA.

BW1, MD specifications

Emerson MD, also known as BW1, is a notable location within the realm of technological development and innovation. This area is distinguished by its commitment to fostering advanced technologies, attracting startups and well-established enterprises alike. The combination of a strategic location and a highly skilled workforce makes Emerson MD a prime destination for companies looking to thrive in a competitive landscape.

One of the primary characteristics of Emerson MD is its focus on the integration of smart technologies. Businesses in the region often leverage the Internet of Things (IoT) to optimize operations and enhance sustainability. From smart supply chain management to energy-efficient solutions, the application of IoT technologies greatly contributes to operational efficiency and cost savings. Furthermore, the area is witnessing a rise in the adoption of artificial intelligence and machine learning, with companies utilizing these innovations to analyze data, improve customer experiences, and drive decision-making processes.

Emerson MD is also known for its emphasis on collaboration among tech entities. Co-working spaces and incubators provide a fertile ground for entrepreneurs and innovators to exchange ideas, share resources, and collaborate on projects. This collaborative atmosphere fosters a sense of community and encourages experimentation, allowing startups to pivot and adapt swiftly to market demands.

The area boasts robust infrastructure, ensuring reliable connectivity and accessibility for businesses. High-speed internet availability allows companies to harness cloud-based solutions and software applications that enhance productivity. Moreover, Emerson's location is strategically positioned near major transportation hubs, enabling efficient distribution channels that are crucial for logistics and supply chain management.

Sustainability is a significant aspect of Emerson MD's development ethos. Many organizations in the area prioritize green technologies, implementing eco-friendly practices that reduce carbon footprints. This commitment to sustainability not only benefits the environment but also resonates with consumers who increasingly value corporate responsibility.

In conclusion, Emerson MD, BW1, is a vibrant hub of technology and innovation, defined by its adoption of advanced technologies, collaborative spirit, strong infrastructure, and commitment to sustainability. Whether you are a startup seeking to establish your footprint or an established corporation looking to innovate, Emerson MD offers an environment ripe for growth and success. The future looks promising for this dynamic location as it continues to attract talent and investment, further solidifying its role in the tech landscape.