Note: After a short period of inactivity the radio returns to the IDLE STATE.
Once in channel mode, there are two ways to select a channel:
Method 1
Turn the rotary knob (1) clockwise or counterclockwise until you reach the desired channel indicated on the display.
Method 2
1 +or euntil: | Channel Number |
| or |
| Alias |
2cto confirm your selection.
Display shows: | Selected |
(for 2 seconds) |
|
Sending a Call
1.Select the desired radio channel.
2.Press the PTT button and speak clearly into the microphone.Your mouth should be
2.5to 5 cm away from the microphone.
3.When transmitting, the red indicator will light continuously.
4.Release the PTT button to listen.
Your radio may be configured for ‘Transmit Inhibit’ under certain conditions (e.g. when the channel is in use by others) in which case, the channel busy tone will sound when you press the PTT or call button to indicate that transmission is inhibited.
When the channel is free, the Channel Free beep
will sound, and you can make a call.
GETTING STARTED
21English