Multiquip BA manual Always keep the work area well organized, Transporting, Maintenance Safety

BA-SERIESTROWEL — RULES FOR SAFE OPERATION

■NEVER Run engine without air filter. Severe engine damage may occur. Service air filter frequently to prevent carburetor malfunction.

■NEVER place your feet or hands inside the guard rings while starting or operating this equipment.

■AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts as this can cause a serious injury.

■ALWAYS keep clear of rotating or moving parts while operating the trowel.

■Moving Parts – Shut down the engine before performing service or maintenance functions. Contact with moving parts can cause serious injury.

■ALWAYS check to make sure that the operating area is clear before starting the engine.

■NEVER leave the machine unattended while running.

■ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using trowel.

■ALWAYS keep the work area well organized.

■ALWAYS clear the work area of any debris, tools, etc. that would constitute a hazard while the trowel is in operation.

WARNING

ALWAYS check to make sure that the operating area is clear before starting the engine.

■No one other than the operator is to be in the working area when the saw is in operation.

■Always observe all applicable compulsory regulations relevant to environmental protection, especially, fuel storage, the handling of hazardous substances, and the wearing of protective clothing and equipment. Instruct the user as necessary, or, as the user, request this information and training.

■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

Transporting

■ALWAYS shutdown engine before transporting.

■Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

■Drain fuel when transporting trowel over long distances or bad roads.

■When placing the trowel inside a truck-bed for transport, always tie-down the trowel.

■ALWAYS use proper lifting techniques when moving the trowel.

Maintenance Safety

■NEVER lubricate components or attempt service on a running trowel.

■ALWAYS allow the trowel a proper amount of time to cool before servicing.

■Keep the trowel in proper running condition.

■Fix damage to the trowel immediately and always replace broken parts.

■Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

■DO NOT use food or plastic containers to dispose of hazardous waste.

Emergencies

■ALWAYS know the location of the nearest fire extinguisher.

■ALWAYS know the location of the nearest and first aid kit.

■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information is invaluable in the case of an emergency and could keep a serious situation from becoming a tragic one .

BA-SERIES WALK-BEHIND TROWEL — OPERATION & PARTS MANUAL — REV. #2 (03/19/04) — PAGE 13