Directed & Group Call Pick-Up Support
• Directed Call | • |
–1. Determine which phone is ringing by listening. This is the target phone.
–2. Press the “Pickup” soft key or dial the corresponding *code on your LVS 9000 phone.
–3. Wait for your phone to prompt you to enter the target phone number.
–4. Enter either the extension number of the target phone.
–5. Your phone will then display a menu of calls that are currently ringing on the target phone.
–6. Select the call to pickup from the menu.
–7. Result: You are connected to the caller of the selected incoming call; the target phone will stop ringing.
–By default the Directed Pickup * code is: 37
Group Call Pick-Up
–To use Group Call Pickup, follow these steps:
–1. Determine if any phone is ringing by listening. It could be more than one.
–2. Press the “GrPick” soft key or dial the corresponding *code on your LVS 9000 phone
–3. Wait for your phone to return a list of all the LVS 9000 phones that are currently ringing. Note that your phone will net be included in this list.
–4. Select the target LVS 9000 phone that you want to pickup.
–5. Wait for your phone to display a menu of calls that are currently ringing on the target phone.
–6. Select the call to pickup from the menu.
–7. Result: You are connected with the caller of the selected call; the target phone will stop ringing.
–By default the Directed Pickup * code is: 36
|
|
|
© 2006 Cisco Systems, Inc. All Rights Reserved. | Linksys/Cisco Proprietary – All Content Subject To Change – Not a Warranty | 56 |
| ||
|
|
|