Invacare 1110532 service manual Programs, Program Settings, Drive Type Motor Type

Page 29

SECTION 7—PROGRAMS

SECTION 7—PROGRAMS

Program Settings

WARNING

DO NOT mismatch a program with the wheelchair type (i.e. selecting a rear wheel drive program for a center wheel drive wheelchair or vice versa). Confirm that the settings and program match the wheelchair before selecting or saving. Otherwise, unintended and unsafe joystick control of the wheelchair will occur, possibly result- ing in serious bodily injury.

The program settings are available as a reference point for initial set-up of the wheelchair, for final user setting or whenever major changes have been made in the performance and a known starting point needs to be reestablished. Confirm that the settings and program match the wheelchair before selecting or saving.

Three programs are available.

1.Select PROGRAMS from the main menu to display the standard value menu.

2.Press or and then the SELECT key to select the standard program to be placed in the temporary memory.

3.Press the SAVE key to store the program into a selected drive.

4.Make changes to specific functions as needed.

The general capabilities of the standard programs are listed below:

PROGRAMMER READS	DRIVE TYPE	MOTOR TYPE

RWD	Rear Wheel Drive	2-Pole

RWD	Rear Wheel Drive	4-Pole

ATM	Rear Wheel Drive	2-Pole

CWD	Center Wheel Drive	2-Pole

MWD	Center Wheel Drive	2-Pole

NOTE: If the default settings in the following tables are not desired, they will need to be changed manually. Performance Adjustments on page 19.

Part No 1110532

29

MK5™NX™Electronics

Image 29

Contents MK5NXElectronics Acronym Definition Useful TermsUseful Terms Table of Contents Connector Descriptions Diagnostic CodesLimited Warranty Remote ProgrammerSpecial Notes Signal Word MeaningOperation Information Controller Settings/Repair or ServiceGeneral Guidelines EMI Information EMI InformationEMI Information Symptom Probable Cause Solutions TroubleshootingAll Power Wheelchairs Wheelchairs With Elevate Systems SymptomJoystick Descriptions SPJand CSPJJoystick Switches and IndicatorsOn/Off Switch Joystick Speed Control KnobCharger/Programming Input Information Gauge DisplayComments Display Description DefinitionDisplay Description Definition Comments Ing Mode Tery charge will be disMode Button SPJ+ and SPJ+ w/ACC Joystick Switches and IndicatorsOn/Off Button Mode ButtonSpeedometer Speed Control ButtonsService Indicator Gauge Display Joystick Descriptions Information DefinitionPerformance Adjust Menu Performance AdjustmentsMain Menu NX, NX-50, NX-75, NX w/ACC, and NX-BNX-LP Making Performance AdjustmentsAcceleration FWD 35% NX, NX-50, NX-75, NX w/ACC, and NX-B Controller Forward Speed Menu Item DescriptionNX-LP Controller NX-LP Controller60% Use Keys to change the value Overview Remote ProgrammerRemote Programmer Terminology KEY Description Description Of Remote Programmer KeysDrive Type Motor Type Program SettingsPrograms ATM 2-POLE RWD 2-POLE Function Program RWD 2-POLE RWD 4-POLEFunction Program M41-1 M41-2 M41-3 FunctionCWD M91 HD Description of Other Functions Other FunctionsWhat Are Diagnostics Codes? Diagnostic CodesNumber of Flashes Diagnostics Code Possible SolutionDiagnostic Codes E07 Diagnostic Codes Number of Flashes Diagnostics CodeController Connector Descriptions Connector DescriptionsNX, NX-50, NX-75, NX-B and NX-LP NX w/ACCMotor Connector Pinout Battery Connector PinoutJoystick Connector Pinout Drive Control Input DCINX, NX-50,NX-75,nx-b NX-LP Battery Charger PortUSA Limited Warranty