UltraSync GPS-100M deployment diagram with a PTP 600 Series radio and a PTP Lightning Protection Unit
Installation continued
The following diagram shows how to connect the UltraSync™ GPS-100M to the PTP 600 ODU fitted with a Lightning Protection Unit (PTP-LPU):
The UltraSync GPS-100M sits between the Lightning Protection Unit and the ODU (outdoor unit) of a PTP
600 Series link. One UltraSync GPS-100M is required for each link. The unit receives a stable, accurate timing signal from its integrated GPS receiver, which obtains signals generated concurrently from 12 medium-earth- orbit satellites. That signal is fed to the PTP 600 ODU via its SYNC port, giving the link a reference point for timing synchronization.
Once the UltraSync GPS-100M has been installed, the PTP 600’s TDD synchronization capability can be enabled and configured using the PTP 600’s installation wizard. For complete installation details, refer to the UltraSync GPS-100M User Manual and the PTP 600 User Manual.
GPS Synchronization Unit GUIDE
