Furuno GP-1610CF manual Icons

Page 96

Icons

Unsuitable chart/chart card not inserted. Chart scale/range is too large.

Chart scale/range is too small. (Page 4-4) Chart data is unreliable. (Page 4-4)

L

L

Suitable chart scale is selected.

L/L position is offset.

(Page 4-4)

(Page 10-1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm setting violated.

 

Disappears when reason for alarm is

Chart position is offset. (Page 10-3)

cleared. (Page 3-7—3-8, 9-1—9-2)

H

Battery voltage (on pcb) is low.

Track is not being recorded.

(Page 14-1)

(Page 5-1)

A-4

Image 96
Contents Page First Edition MAR Safety Instructions Safety Instructions for the OperatorSafety Instructions for the Installer Table of Contents by Subject Setting Destination Table of Contents by Display Item Foreword Word to GP-1610CF OwnersFeatures System Configuration Display UnitInstallation Equipment ListsStandard supply Optional equipment520-5PSD Installation of Standard Equipment Installing the display unitMounting considerations Installing the antenna unit Tabletop mountingAntenna unit mounting procedure Typical antenna unit mounting locationsFastening pipe to antenna Securing antenna to mast with vinyl tape Wiring Power cableAntenna unit Transducer11 Display unit, rear view Installation of Transducers Installing the inside-hull mount transducerRemarks on installation Necessary toolsAttaching the transducer 13 Coating the transducer face with silicone sealantObserving the picture Press twice to select ManualFinal preparation Installing the thru-hull mount transducer Transducer mounting locationTransducer outline drawings Typical through-hull mount transducer installations Acceptable transducer mounting locationsDeep-V hull High speed V-planing hullProcedure for installing the thru-hull mount transducer 22 Construction of fairing blockInstalling the transom mount transducer 23 Transom mount transducer mounting locations24 Transom mount transducer, mounting flush with hull Transducer preparationInstallation of Optional Sensors 26 Water temperature/speed sensor ST-02MSBTransom mount water temperature sensor T-02MTB Thru-hull mount water temperature sensor T-03MSBConnecting a Dgps beacon receiver Connection of Optional EquipmentConnecting a sensor 30 Connection of other Dgps beacon receiversMJ-A10SPF MJ-A6SRMDMJ-A10SRMD Initial Settings Sensor connectionAutopilot or remote display connection Press the Menu key Press the 0 key Press the 6 key35 Nmea setup menu Dgps beacon receiver connection Press the Menu key Press the 0 key Press the 8 keyPress t to select on in the Dgps line Operational Overview Control DescriptionInserting Chart Cards Turning On/Off the PowerInsert the chart card label side up, arrow forward Close the cover and fix itAdjusting Tone and Brilliance Plotter DisplaysSelecting a plotter display Sample plotter displaysPlotter/sounder display Data displayGraphic display Highway displaySounder Displays Selecting a sounder displayNormal sounder display 50 kHzMarker zoom display Bottom-lock displayBottom zoom display Scope displayBasic Menu Operation Press the Menu key to display the Main menuPress the Menu key to escape Video Sounder Operation Principle of OperationHow to enable automatic sounder operation Manually adjusting the sounder pictureAutomatic Sounder Operation Manual Sounder OperationPress the 6 key to display the Video Sounder Setup menu Suppressing Low Level NoiseSelecting Picture Advance Speed Suppressing InterferenceErasing Weak Echoes Changing Zoom Magnification Factor Selecting Hue color arrangementMeasuring Depth Knowing Depth Change by Audible ChimeOffsetting the Depth Readout Displaying the Water Temperature GraphSelecting Unit of Depth Measurement Fish Alarm Offsetting Water Temperature ReadoutPress to select Fish on Bottom Alarm Water Temperature AlarmTurning On/Off the Expansion Range Marker Receiver Sensitivity gain Adjustment Selecting Bottom-Lock Expansion WidthStopping Transmission Interpreting the Display Zero lineFish school echoes Bottom echoSurface noise/aeration 24 Surface noise/aerationGPS, Chart Overview What is GPS?Principle of GPS How the GPS receiver calculates positionPosition-fixing accuracy Hdop This manual Hdop is referred to as DOPPresentation Mode Shifting the CursorNorth-up Course-upChanging Chart Scale/ Range Chart CardsSelecting Screen Center by Cursor Shifting the DisplayRemarks on chart display Furuno chart symbolsDifference between Furuno and Navionics charts Lighthouse and buoy data displayTrack Stopping/Restarting Plotting of TrackChanging Track Color Erasing All TrackChanging Track Plotting Interval Smoothing TrackPress the ENT key Press the Menu key Press the Menu key Press the 0 key Press the 2 keyMarks Entering MarksEntering Event Marks Erasing Individual Marks Changing Mark AttributesCancelling MOB position as destination Entering the MOB MarkErasing All Marks Entering the MOB markModel Cable Connection procedure Operation on radar Radar Target MarkWAYPOINTS, Routes Entering WaypointsEntering a waypoint at own ships position Enter a comment as followsEntering waypoints by latitude and longitude Entering a waypoint by the cursorErasing Individual Waypoints Changing Waypoint PositionEntering waypoints by event position or MOB position Erasing waypoints by the cursorChanging Waypoint Mark Size Entering RoutesWaypoint mark size can be selected to large or small Press or to select route numberEditing Routes Erasing RoutesSetting Destination Setting DestinationSetting destination by waypoint Setting destination by cursorSetting destination by event position/ MOB position Setting a route as destinationPress or to select a route Skipping Route Waypoints Cancelling Destination How a waypoint is skippedPLOTTER-RELATED Alarms Arrival/Anchor Watch AlarmXTE Cross Track Error Alarm Speed AlarmTrip Alarm Offsetting GPS Position POSITION-RELATED OperationsDisplaying Position in LOPs Displaying position in Loran C LOPsSelecting Navaid Displaying True or Magnetic BearingsMagnetic Variation Press the ENT key followed by the Menu keyOffsetting Chart Position Press s to select onGPS Setup Menu GPS Setup menu descriptionGPS Operations Speed Averaging Optional Equipment Setup Setting up Dgps Beacon ReceiverSensor Setup menu description Selecting SensorsDgps setup menu Chart Attributes Customizing the DisplayPlotter Display Marker Attributes Waypoint mark size Cursor sizeChart Range or Scale Indication Unit of Distance MeasurementMaintenance & Troubleshooting MaintenanceReplacement of Fuse, Battery Simple Troubleshooting Simple troubleshootingError Messages Error messagesDiagnostic Tests Memory, I/O port testPanel test To escape, press the ESC key three timesGPS Monitor Display Display testGPS monitor display description Demonstration Display Memory Card Operations for techniciansSaving data Press s to select YESClearing the Memory Loading dataPower and Environmental Conditions Dimensions and WeightVideo Sounder GPS ReceiverWorld Time Standards Geodetic Chart List Icons GPS Plotter Magnetic variation offset Navigation calculationNmea Plotting intervalResolution ClutterDetecting area Display colorReturning signal Water temperature sensorSounding range Menu Tree On next Page Decca Chains Page Page Page Page Page Index Index-1Index-2 Index-3

GP-1610CF specifications

The Furuno GP-1610CF is a sophisticated marine navigation system designed for enthusiasts who demand accuracy and reliability on the water. Featuring a 10.4-inch color LCD display with a resolution of 640 x 480 pixels, this unit provides crystal-clear images of charts and navigation information, even under direct sunlight. Its user-friendly interface allows for intuitive management of various functions, making it accessible for both novice and experienced mariners.

One of the standout features of the GP-1610CF is its integrated GPS receiver, which boasts a high sensitivity that ensures rapid acquisition of satellite signals and precise positioning. The unit supports a range of positioning formats, including WAAS (Wide Area Augmentation System), allowing for enhanced accuracy within the coastal dimensions. Additionally, the GP-1610CF is compatible with DGPS (Differential GPS) systems, further refining positional accuracy and providing a reliable navigation experience.

The GP-1610CF also supports C-MAP NT+ charting, offering an extensive variety of cartographic data covering numerous regions. This enables users to visualize marine environments with detailed bathymetric information, harbor layouts, and navigational aids. The system's customizable waypoints and route planner facilitate efficient marine navigation, allowing users to create multiple routes and track them in real time.

In terms of connectivity, the GP-1610CF offers NMEA 0183 output, which allows it to interface seamlessly with other marine electronics such as autopilots, radar systems, and depth sounders. This enabling communication between devices enhances overall situational awareness and improves navigation assistance.

The unit is built to withstand the harsh marine environment, featuring a robust housing that is resistant to saltwater, humidity, and temperature variations. Additionally, the GP-1610CF can function in challenging lighting conditions thanks to its adjustable contrast and brightness settings, which help maintain visibility during nighttime operation.

Overall, the Furuno GP-1610CF stands as a reliable choice for sailors seeking a high-performance navigation solution. With its combination of advanced GPS technology, high-resolution display, extensive chart compatibility, and robust design, this device continues to be a trusted companion for marine adventures around the globe. Whether cruising, fishing, or engaging in professional navigation, the GP-1610CF delivers essential features that empower users to navigate with confidence and accuracy.