Lowrance electronic HDS-10M, HDS-8M operation manual Specifications HDS-8/8m & HDS-10/10m, 115

Page 117

Specifications

Specifications: HDS-8/8m & HDS-10/10m

General

Case Size:

HDS-8: 7.8” H x 10.6” W x 4” D (19.8 x 26.9 x

10.1 cm), 4.2 lbs

HDS-10: 8.9” H x 12.3” W x 4” D (22.6 x 31.2 x 10.1 cm), 5.24 lbs

Display:

HDS-8: 8.2” (20.8 cm) diagonal high contrast color LCD, 800 x 600 pixel resolution

HDS-10: 10.4” (26.4 cm) diagonal high con- trast color LCD, 800 x 600 pixel resolution

Backlighting:

HDS-8: LED backlit screen and keypad

HDS-10: LED backlit screen and keypad

Supply voltage: 10 to 18 volts DC

Supply current:

HDS-8: 0.9A at 13VDC with backlight on, 0.45A with backlight off

HDS-10: 1.0A at 13VDC with backlight on, 0.46A with backlight off

Operating temperature: -15°C to 55°C (5°F to 130°F)

MMC slots: Two with waterproof doors. Reads SD and MMC.

Audible alarms: Local and networked alarms available for included and optional compo- nents, including sonar, GPS/navigation, battery voltage, weather, engine/transmission, tank level, AIS and DSC.

Communications: NMEA 0183 input and output up to 38,400 baud, NMEA 2000, Navico Ethernet

Standards compliance:

Waterproofing: IPX7 with card door closed

EMC: IC RSS-310; FCC Part 15 Class B;

IEC60945

Compliance:

The Lowrance HDS complies with the following regulations:

CE compliant under R&TTE directive.

C - Tick compliant under Radiocommunica- tions act 1992.

CCS Type approval.

HDS also meets the technical standards in ac- cordance with Part 15.103 of the FCC rules. For more information please refer to our website: www.lowrance.com.

Sonar (HDS-8/10 only)

Frequency: 50/200 kHz or 83/200 kHz

Power output: 250W Peak to Peak (31W RMS) actual, 30,000W Peak to Peak analog equivalent

Depth capability: 5,000 ft dependent on transducer configuration and installation, bot- tom composition and water conditions

Built-in sonar recording capacity: 10min to 2hrs internal memory depending on depth range and ping speed

Surface water temperature: Available built into transducer or via external network

Paddlewheel speed log: Available with op- tional speed sensor

Audible alarms: Shallow, Deep, Temperature

change

GPS Navigation

Receiver/antenna:

Built in 16 parallel channel internal antenna

External antennas supported via NMEA 0183 and NMEA 2000

Satellite DGPS: WAAS, EGNOS, MSAS sup- ported

Compass Safe Distance: 20cm (8 inches)

Charting: Contains built-in Lowrance or Navionics basemap; Lowrance map and chart range, Navionics Gold, Platinum, and Platinum Plus supported via SD/MMC card

Position updates: 1 second with internal antenna

Chart scale: 50ft (20m) to 2,500 nautical miles (3,000 miles)

Built-in GPS recording capacity: 32MB internal memory capacity for up to 5,000 user- definable waypoints, 10 tracks, and 200 routes

NOTE: The above memory capacities refer only to the unit’s on-board memory. The amount of GPS and sonar data you can record is limited only by the number of MMC/SD cards you have.

Audible alarms: Arrival, off-course, anchor

115

Image 117
Contents HDS-8, HDS-10, HDS-8m & HDS-10m Copyright 2011 Navico All Rights Reserved Software updates for your unitTable of contents 2D and Shaded Relief Contents115 Introduction About this manual HDS-8/10 and HDS-8m/10mManual Conventions HDS-8/10 & HDS-8m/10m Getting Started Menus LanguageClosing Menus To select a languageSelecting a Fishing Mode Selecting Chart DataTo select Chart data To select a fishing modeTo Restore Defaults Restore DefaultsEntering Letters in Text Boxes SoftkeysActive cursor Using softkeysPages Pages ScreenSelecting Pages To save pages Saving pagesTo save over saved pages To clear saved pagesEdit Mode To access Edit Overlay menuData Overlay Data Overlay menuTo move/place a gauge Move or Placing a GaugeSelect Data TypeLimits SizeAdd Source Configuration menuTo add a source To remove add source dataOn the Chart Page you can ChartSonar Page Sonar units only On the Sonar Page you canInfo Radar Page optionalOn the Radar Page you can On the Info Page you canInfo menu DashboardsEdit To edit gauge display Edit Info menuTo select info To Configure Limits To add sourceTo remove a source To change layout Change LayoutAdd Dashboard To add a dashboardTo access Utilities SettingsUtilities UtilitiesData files/Sonar logs To copy data files/sonar logsTo delete data files/sonar logs Displaying Combo Pages Selecting an Active PanelTo display a combo Adjust Panel Sizes Displaying Multiple Panels Sonar units onlyTo display multiple panels To adjust panel sizes Sonar Operation HDS-8 & 10 only To access the SonarSonar Menu Auto SensitivitySensitivity Range ColorlineFrequency SplitAdjust To Adjust Sensitivity and ColorlineStop Sonar Sonar Options To set Upper and Lower LimitsCustom Upper and Lower Limits Ping SpeedPalette To select a Split optionTo select a Palette Depth Line Temperature GraphAmplitude Scope Zoom BarsLog Sonar Data Measure DistanceFish ID To select a Fish ID optionTo select Save to or Bytes per Sounding To input filenameTo stop logging Start LoggingSource To share/receive sonar dataChart Operation To access the ChartPrevious image shows items you will see on the chart Chart menu Chart Options menuFind Current Position To select a Chart page POI Selecting POIs on Chart page with CursorWaypoints Go To CursorTo create a Waypoint at the cursors position Create Waypoint from ChartWaypoint menu To create a Waypoint at the Vessels positionWaypoints screen menu Waypoints screenWaypoints screen, Sort Waypoints Waypoints screen, Search for Waypoint by nameWaypoint Information screen To Search for Waypoint by NameEditing a Waypoint on the Chart To Edit a Waypoint from the ChartEdit Waypoint menu Edit Waypoint name, description, position or depth To Edit Waypoint depth or alarm radiusEdit Waypoint icon and color To Edit Waypoint name or descriptionCreate Route from Chart To Create a New Route from the ChartRoutes Routes screen Routes screen menu To Edit RouteTo Display / Hide Route To Insert, Edit or Remove Waypoints from a Route To Navigate Route from Routes screenTo Search for Route by Name Trails Trails screenTrails screen menu Edit Trail menu New Trail menuTo Create a New Trail To edit a Trail nameMeasuring Distances on Chart To select/deselect Measure featureTrail line Color options To search for Chart page POI using coordinates Find Chart itemTo search for specific Chart page item Search by CoordinatesTo select / deselect the Look Ahead feature To change Chart page orientationMap Orientation Look AheadTo select / deselect Chart Categories Chart categories2D and Shaded Relief Shaded Relief only available on U.S. Insight modelsChart page Icons, Tides and Currents Radar OverlayTo turn on radar overlay Navionics Radar OptionsTo view Navionics data Navionics Settings menu Navionics Settings and OptionsTo change Navionics Settings Platinum or Platinum Plus charts Radar Operation optional To access the RadarTo access the Adjust menu Adjust menuRadar menu Radar StateAuto Gain Low, Medium and HighTo select Auto Gain Acquire Targets Sea ClutterPosition To change the PPI positionOffset SymbologyTo adjust an EBL/VRM AdjustEBL/VRM menu To select an EBL/VRMData Box Guard ZonesTo choose alarm trigger vessels entering or exiting zones Using the Adjust menuRadar Overlay To turn on a Guard ZoneTo access the System menu Settings MenuSystem LanguageTo change Text Size To change Key Beep settingsKey Beeps Time optionalDatum To change magnetic variation settingsTo select a Datum Coord SystemSatellites Screen Capture To take a screen captureTo save screen captures to MMC/SD card To access Advanced Settings Restore DefaultsTo adjust Waypoint, Hardware and Radar settings AdvancedNavigation PagesLogging Type TrailsTo select a Logging Type Distance PeriodTime Period To set up phantom loranTo set Time Period Phantom LoranChart Data Chart Settings MenuTo access the Chart Settings Menu Range RingsGrid Lines Popup InformationWaypoints To use Heading ExtensionHide Chart RoutesTrails Network Sonar Sonar Settings HDS-8 &10Noise Rejection Surface ClarityManual Mode To adjust Surface ClarityScroll Speed Fishing Modes Installation Menu Reset Fishing ModeKeel Offset Water Speed Calibration To set Keel OffsetTo calibrate Water Speed Temperature Averaging Temperature CalibrationWater Speed Averaging To select a Water Averaging intervalTo select a Temperature Averaging interval Transducer TypeTo select a Transducer Type Target Expansion Radar Settings Menu optionalTarget Trails PaletteOrientation North IndicatorThreshold To change Map OrientationRange Markers CompassBearings To set T/M or R MarpaTo adjust CPA and Tcpa settings Canceling Marpa targetsSelecting Marpa targets To cancel all targets To cancel individual targetsMarpa Settings To select history lengthTarget Alarms InstallationTo set Marpa target alarm To access Radar Installation menuInstallation Adjustment Menu Bearing alignmentTo select Heading up orientation To Adjust Bearing Alignment To Adjust Range OffsetRange offset To Adjust Antenna Height Fast scan mode BR24 Radar onlyAntenna Height TuneReset Radar to Factory Defaults To make manual adjustments Sidelobe suppres- sionSidelobe suppression BR24 only Fuel RefuelTo input fuel added To calibrate engines To set tank to fullVessel Setup 100Fuel Used To select engine-tank configuration Engine/Tank Configuration101 To input tank sizeAlarms To enable/disable an Alarm102 Siren Enabled Units103 104 Network105 106 Configuring Devices To configure a device name or device tank size107 To access calibration instructions To configure device location108 InstanceTo configure serial ports Diagnostics109 Nmea 2000 receive/send waypointTo access Nmea 0183 Output screen Mmsi Maritime Mobile Service Identity110 Nmea 0183 Output111 To choose a Demo Mode Demo ModeSimulator 112113 Route 114To select a route Set Start Position115 Specifications HDS-8/8m & HDS-10/10m116 Unit CareUnit won’t turn on TroubleshootingUnit freezes, locks up, or operates erratically Weak bottom echo, erratic readings or no fish returns118 119 No fish arches when Fish I.D. is turned off120 Noise121 GPS Not AccurateCards not Read by Unit Current Position not on the Screen122 Reset the Unit Update the SoftwareRadar won’t Start Up 123124 125 IndexEBL/VRM 126127 128 Navico Databases License Agreement Databases Limited Warranty
Related manuals
Manual 6 pages 19.75 Kb