Waypoint Position | 66 |
Selecting a Waypoint | 66 |
Set a Waypoint by Average Position | 66 |
Set a Waypoint by Projecting a Position | 67 |
Section 5: System & GPS Setup Options | 69 |
Alarms | 69 |
To change alarm settings: | 69 |
Check MMC Files and Storage Space | 70 |
Communications Port Configuration | 70 |
Configure NMEA | 71 |
Coordinate System Selection | 72 |
To setup Loran TD: | 73 |
Map Fix | 73 |
To configure a map fix: | 74 |
Customize Page Displays | 75 |
Customize Satellite Status Page | 75 |
GPS Simulator | 76 |
To get to the GPS Simulator: | 76 |
Simulating Trail or Route Navigation | 76 |
Initialize GPS | 77 |
Map Auto Zoom | 77 |
Map Data | 78 |
Earth Map Detail | 78 |
| 78 |
Map Boundaries | 78 |
Fill Water With White | 79 |
Map Overlays (Range Rings; Lat/Long Grid) | 79 |
Map Datum Selection | 79 |
Map Detail Category Drawn | 80 |
Map Orientation | 81 |
NauticPath USA Marine Charts | 82 |
Nautical Chart Notes | 82 |
Port Information | 83 |
Tidal Current Information | 84 |
Tide Information | 86 |
Navionics Charts | 87 |
Overlay Data | 88 |
To overlay information on your screen: | 89 |
To remove overlaid data: | 90 |
To move overlaid data: | 90 |
91 | |
Reset Options | 92 |
Require WAAS | 92 |
iii |
|