Working conditions, Service Procedure | Sherwood SR 7206 guide

www.sherwoodscuba.com

Working conditions

Service should be performed in a well lighted, clean area with access to proper tools. Use of improper tools or techniques may cause permanent damage and void the warranty.

Service Procedure

The standard service procedure involves disassembly, inspection, cleaning, reassembly and adjustment of the regulator. As each step of the process is performed check the parts for damage or distortion. Replace parts that appear to have sustained damage.

Cleaning can normally be performed by rinsing with the aid of mild detergent and a soft brush followed by a thorough rinsing with fresh water. Use of an ultrasonic cleaner and commercially available solutions can accelerate this process. Be certain to check with the supplier of the solution for compatibility with respiratory equipment. Thorough rinsing should always follow the use of any cleaning agents.

O-rings should be lightly lubricated with Crysto-Lube MCG 111 before installation. Avoid the use of silicone spray or other lubricants containing hydrocarbons.

Disassembly

1.Pull back the hose protector (26) and inspect the hose for signs of cuts, cracks or other damage. A damaged hose should be replaced.

2.Remove the Dual Octo assembly from the first stage regulator at the hose connection with a 9/16" (14 mm) wrench.

3.Use a 3/4" (19 mm) wrench to support the Inlet Fitting (1) and 5/8"(16mm) wrench to separate the swivel end of the hose from the Inlet Fitting. Do not allow the Inlet fitting to rotate within the Housing (10), as this may cause damage to the Housing.

4.Inspect the o-rings (18 and 20) at the both ends of the hose for signs of wear or damage. If these are damaged they should be replaced. Use only a nonmetallic or a soft brass instrument to remove the o- rings. Use of other tools and carelessness may cause damage to the sealing surfaces on the hose fittings requiring replacement of the entire hose. Sherwood does not recommend replacement of the o-ring at the swivel end of the hose if it does not show evidence of wear or damage.

5.Remove the Mouthpiece (12) by cutting the Mouthpiece Strap (13) with side cutting pliers. Be careful not to cut or damage the Mouthpiece. Discard the strap and examine the Mouthpiece for cuts or tears. If there is damage it should be replaced.

6.Remove the Cover Ring (24) by unthreading it from the Housing by hand. Tools should not be necessary and could cause damage to the Cover Ring. If it is difficult to remove, soak the entire regulator in warm water for a few minutes to loosen mineral deposits. Remove the Purge Cover (23) and Diaphragm Retainer (22).

7.Gently remove the Diaphragm (21) from the Housing. Hold the Diaphragm up to a light source and gently stretch to search for tears or pin holes. If any are found replace the Diaphragm. If it is undamaged it may be reused.

SR 7206 specifications

The Sherwood SR 7206 is a versatile and powerful audio receiver that delivers an exceptional audio experience for both music enthusiasts and home theater aficionados. With its robust design and array of features, this receiver has become a popular choice among consumers seeking to enhance their home entertainment systems.

One of the standout features of the SR 7206 is its capability to deliver impressive sound quality. It boasts a power output of 100 watts per channel across seven channels, providing ample power for driving a wide range of speakers. This ensures that listeners can enjoy rich and immersive audio whether they're watching movies, playing video games, or listening to music.

The SR 7206 is equipped with a range of advanced technologies that contribute to its superior audio performance. One such technology is the Dolby TrueHD and DTS-HD Master Audio decoding, which allows for lossless audio playback of high-definition soundtracks. This feature is particularly beneficial for film buffs, as it enables the receiver to reproduce the full dynamic range of soundtracks with precision and clarity.

Another notable characteristic of the Sherwood SR 7206 is its seamless connectivity options. It includes multiple HDMI inputs, allowing users to connect a variety of devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports 4K video pass-through, providing a future-proof solution for those looking to experience ultra-high-definition content. Additionally, it features USB and optical inputs for connecting additional audio sources, ensuring compatibility with a wide range of devices.

The SR 7206 also prides itself on its user-friendly interface. The on-screen display provides easy navigation through the various settings and options, making it simple for users to customize their audio experience. The receiver is also equipped with a remote control, allowing for convenient operation from a distance.

In terms of design, the Sherwood SR 7206 has a sleek and modern aesthetic, with an intuitive layout of knobs and buttons on the front panel. Its sturdy construction ensures durability and longevity, making it a reliable addition to any home entertainment setup.

In summary, the Sherwood SR 7206 is a powerful and feature-packed audio receiver that excels in delivering high-quality sound and seamless connectivity. With its advanced technologies, user-friendly interface, and elegant design, it stands out as an excellent choice for those looking to elevate their audio-visual experience. Whether for movies, music, or gaming, the SR 7206 promises to deliver an exceptional sound experience tailored to the needs of every listener.