CbN Series 2000
Gearmotors and Reducers
C-Face Assembly
One-Piece Splined Coupling
"O" RING
A
56C, 140TC
MOTOR
A
180TC - 280TC
MOTOR
Notes:
1.Install motor shaft key onto motor shaft.
2.Lubricate spline teeth of coupling and input shaft with Mobil® Grease XTC or equivalent coupling grease.
3.Install coupling onto motor shaft and set to the specified distance.
Refer to table below (dimension "A") for correct setting distances.
4.Apply thread locking compound to set screw and install. Tighten into coupling.
5.Assemble motor to gear reducer engaging splined coupling and bolt the motor to the
INPUT | REDUCER SIZE | MOTOR | A | |
TYPE | CbN | SIZE | (INCHES) | |
|
|
| ||
UE | 20, 21, 22 | 56C, 140TC | 3.06 | |
|
| |||
180TC, 210TC | 4.04 | |||
|
| |||
|
|
|
| |
|
| 56C, 140TC | 3.12 | |
|
|
|
| |
UE | 23, 24 | 180TC, 210TC | 4.11 | |
|
| |||
250TC | 4.75 | |||
|
| |||
|
|
|
| |
|
| 280TC | 5.64 | |
|
|
|
| |
|
| 140TC | 3.86 | |
|
|
|
| |
U | 25 | 180TC, 210TC | 5.34 | |
|
| |||
250TC | 5.34 | |||
|
| |||
|
|
|
| |
|
| 280TC | 6.31 | |
|
|
|
|
Mobil is believed to be a trademark and/or trade name of Exxonmobil Oil Corporation and is NOT owned or controlled by Emerson Power Transmission. Emerson Power Transmission Corporation cannot and does not represent or warrant the accuracy of this information.
4