Important Safety Instructions

Safety Instructions

Notice For Customers If Your Unit Is Equipped With A Power Cord.

WARNING: THIS APPLIANCE SHALL BE CONNECTED TO A MAINS SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION.

The cores in the mains lead are coloured in accordance with the following code:

GREEN and YELLOW - Earth

BLUE - Neutral

BROWN - Live

As colours of the cores in the mains lead of this appliance may not cor- respond with the coloured markings identifying the terminals in your plug, proceed as follows:

•The core which is coloured green and yellow must be connected to the terminal in the plug marked with the letter E, or with the earth symbol, or coloured green, or green and yellow.

•The core which is coloured blue must be connected to the terminal marked N or coloured black.

•The core which is coloured brown must be connected to the terminal marked L or coloured red.

This equipment may require the use of a different line cord, attachment plug, or both, depending on the available power source at installation. If the attachment plug needs to be changed, refer servicing to qualified service personnel who should refer to the table below. The green/yellow wire shall be connected directly to the units chassis.

	CONDUCTOR		WIRE COLOR
			Normal	Alt
L		LIVE	BROWN	BLACK
N		NEUTRAL	BLUE	WHITE
E		EARTH GND	GREEN/YEL	GREEN

WARNING: If the ground is defeated, certain fault conditions in the unit or in the system to which it is connected can result in full line voltage between chassis and earth ground. Severe injury or death can then result if the chassis and earth ground are touched simultaneously.

WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING:

KEEP THESE INSTRUCTIONS

HEED ALL WARNINGS

FOLLOW ALL INSTRUCTIONS

the apparatus shall not be exposed to dripping or splashing liquid and no object filled withi liquid, such as vases, shall be placed on the appara- tus.

CLEAN ONLY WITH A DRY CLOTH.

DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUC- TIONS.

DO NOT INSTALL NEAR ANY HEAT SOURC- ES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUD- ING AMPLIFIERS) THAT PRODUCE HEAT.

ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER.

UNPLUG THIS APPARATUS DURING LIGHT- NING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME.

Do not defeat the safety purpose of the polar- ized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Refer all servicing to to qualified service person- nel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

POWER ON/OFF SWITCH:The Power switch used in this piece of equipment DOES NOT break the connection from the mains.

MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3

mmin each pole shall be incorporated into the electrical installation of the rack or building.

FOR UNITS EQUIPPED WITH EXTERNALLY ACCESSIBLE FUSE RECEPTACLE: Replace fuse with same type and rating only.

MULTIPLE-INPUT VOLTAGE:This equipment may require the use of a different line cord, attachment plug, or both, depending on the avail- able power source at installation. Connect this equipment only to the power source indicated on the equipment rear panel.To reduce the risk of fire or electric shock, refer servicing to quali- fied service personnel or equivalent.

PCM96 specifications

The Lexicon PCM96 is a high-end digital effects processor renowned for its versatility, high-quality sound, and advanced signal processing capabilities. Tailored for both professional studio environments and live sound applications, the PCM96 delivers an impressive range of features that appeal to audio engineers, musicians, and producers alike.

At the core of the PCM96 lies Lexicon’s proprietary algorithm technology, which has been honed over decades of developing industry-leading reverb and effects processors. With its dual-engine architecture, the PCM96 allows users to access a wide variety of effects simultaneously. This dual-engine approach means that the processor can handle complex audio signals with unmatched clarity and precision.

One of the standout features of the PCM96 is its extensive library of reverb algorithms. From lush concert hall environments to tight and intimate spaces, the PCM96 captures the nuances of acoustic realism. Additionally, it provides advanced options for customizing reverb tails, predelay, and diffusion, allowing users to create unique soundscapes tailored to their specific needs.

Beyond reverb, the PCM96 boasts a rich selection of modulation effects, including chorus, flanging, and delay. These effects can be combined with the reverb algorithms for intricate sound design possibilities. The processor supports up to 96 kHz sample rates, ensuring high fidelity and compatibility with professional digital audio workstations (DAWs).

Another key characteristic of the PCM96 is its intuitive user interface. The front panel features a bright LCD display and straightforward controls, making it easy for users to navigate through presets and tweak parameters on the fly. Additionally, the PCM96 can be integrated seamlessly into various digital audio environments via its comprehensive connectivity options, including AES/EBU, S/PDIF, and MIDI.

The PCM96 also supports remote control and automation via MIDI, enabling users to synchronize effects with musical performances or recording sessions. This feature is particularly beneficial for live sound applications where quick adjustments can significantly impact the performance dynamics.

In summary, the Lexicon PCM96 stands out as a premier effects processor that brings together high-quality sound, innovative technologies, and user-friendly design. Its robust set of features, combined with the legendary Lexicon sound, makes it an indispensable tool for audio professionals seeking to elevate their creative possibilities in sound design and music production.