Left, To use Banana Plugs US only | Polk Audio LSi25 guide

FIGURE 1

LEFT

Left Speaker	Right Speaker
FIGURE 2

FIGURE 1

Consult serial number label for correct speaker orientation.

Consulte la etiqueta del número de serie para establecer la orientación correcta del altavoz.

Pour orienter vos enceintes correctement, consultez l’étiquette du numéro de série.

Angaben zur ordnungsgemäßen Ausrichtung der Lautsprecher finden Sie auf dem Typenschild mit der Seriennummer.

FIGURE 2

Create an equilateral triangle between the speakers and the listening position. Face tweeters “in.” LSi Series Loudspeakers are magnetically shielded for safe placement near TV or video monitors.

If you notice video distortion or discoloration, immediately move the speakers away from the video source and call Polk Audio Customer Service 800.377.7655 (US and Canada) or polkcs@polkaudio.com.

Haga un triángulo equilátero con los altavoces y la posición de audición.

Créez un triangle équilatéral entre les enceintes et la position d’écoute.

Bilden Sie ein Dreieck zwischen den Lautsprechern und Ihrer Hörposition.

FIGURE 3

For stability on carpet, use spikes. For stability on hard floors, use rubber feet over spikes.

Use púas para estabilizar los altavoces sobre una alfombra.

Use patas de goma sobre las púas para estabilizarlos sobre pisos duros.

Pour plus de stabilité sur tapis, utilisez les picots.

Sur planchers, recouvrez les picots des pieds de caoutchouc.

Die Verwendung von Befestigungsstutzen gewährleistet die Stabilität der Lautsprecher bei Platzierung auf Teppichböden. Auf hartem Untergrund sollten die Stutzen mit Gummifüßen überzogen werden.

FIGURE 4

Loosen hex nut

Desenrosque parcialmente la tuerca hexagonal

Desserrer l’écrou

Sechskantmutter lösen

Insert speaker wire through hole

Inserte el alambre para la bocina en el orificio

Insérer le fil du haut-parleur dans le trou

Lautsprecher-Draht durch das Loch schieben

Tighten hex nut

Enrosque la tuerca de nuevo

Serrer l’écrou

Sechskantmutter festschrauben

FIGURE 4

Using binding post connections.

Uso de conexiones con tornillos de presión.

Utilisation des bornes de branchement.

Verwendung von Anschlussklemmen.

Do not insert insulated section of speaker wire

No inserte alambre con material aislante

Ne pas insérer la partie isolée du fil du haut-parleur

Isolation des Lautsprecher-

Drahtes nicht in das

Loch schieben

To use Banana Plugs (US only):

Unscrew the binding post lug nuts completely

to expose the binding post plugs

(plastic plugs inserted into the binding posts).

Carefully pry out the binding post plugs

to expose banana plug holes.

Screw the lug nuts back on the binding posts

and insert banana plugs. (This is for US owners only.)

Contact Polk Audio Customer Service 1-800-377-7655 (Outside US: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM Eastern Time, polkcs@polkaudio.com

LSi25 specifications

The Polk Audio LSi25 is a remarkable loudspeaker that has garnered attention among audio enthusiasts for its exceptional sound quality and innovative technology. With a design that emphasizes both aesthetic appeal and high performance, the LSi25 stands out in any home audio setup.

At the heart of the LSi25 is its advanced driver design. The speaker features a 1-inch silk dome tweeter that delivers crisp and clear high frequencies, ensuring that details in music and dialogue are never lost. Accompanying the tweeter are dual 6.5-inch dynamic balance woofers that produce deep, rich bass, providing a full-bodied sound that fills the room. The integration of these drivers creates a seamless soundstage, allowing listeners to experience music and movie audio as the artist or director intended.

One of the standout technologies in the LSi25 is the Dynamically Balanced technology, which minimizes unwanted resonances and distortion. This innovative approach ensures that the sound remains pure and true, regardless of the volume level. Additionally, the LSi25 employs a unique port design that enhances bass response while reducing turbulence, resulting in deeper lows without sacrificing clarity.

The speaker cabinet itself is constructed with rigid materials that reduce cabinet resonance and contribute to an overall cleaner sound. The LSi25 also features a visually appealing finish available in various options, allowing it to blend effortlessly into a variety of home decors.

Connectivity is another key aspect of the LSi25. The binding posts are designed to accommodate various cable types, making it easy for users to integrate the speaker into their existing audio systems. This versatility means that whether you are using a powerful receiver or a more modest amplifier, the LSi25 can deliver an exceptional listening experience.

Overall, the Polk Audio LSi25 is a well-engineered loudspeaker that combines beautiful design with cutting-edge audio technology. It caters to discerning listeners looking for a speaker that can bring their music and movies to life with stunning clarity, depth, and a sense of space. Whether used in a stereo setup or as part of a surround sound system, the LSi25 delivers a performance that is sure to impress even the most critical audio aficionado.