| Section |
Operating this unit | 02 |
|
|
!When you recall a preset station, the tuner may update the preset station with a new fre- quency from the station’s AF list. (This is only available when using presets on the F1 or F2 bands.) No preset number appears on the dis- play if the RDS data for the station received differs from that for the originally stored sta- tion.
!Sound may be temporarily interrupted by an- other program during an AF frequency search.
!AF can be turned on or off independently for each FM band.
Using PI Seek
If the tuner can’t find a suitable station, or re- ception status becomes bad, the unit will auto- matically search for a different station with a same programming. During the search,
PI SEEK is displayed and the output is muted.
Using Auto PI Seek for preset stations
When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall.
!The default setting for Auto PI Seek is off. See Switching Auto PI Seek on page 14.
Limiting stations to regional programming
When AF is used, the regional function limits the selection of stations broadcasting regional programs.
1Press FUNCTION to select REG.
2Press a or b to turn the regional func- tion on or off.
Notes
!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).
!The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station.
!The regional function can be turned on or off independently for each FM band.
Receiving traffic announcements
TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which
1Tune in a TP or enhanced other net- work’s TP station.
TP indicator will light.
2Press TA to turn traffic announcement
standby on.
# To turn traffic announcements standby off, press TA again.
3Use VOLUME to adjust the TA volume when a traffic announcement begins.
The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.
4Press TA while a traffic announcement is being received to cancel the announce- ment.
The tuner returns to the original source but re- mains in the standby mode until TA is pressed
again.
# You can also cancel the announcement by pressing SOURCE, BAND, a, b, c or d while a traffic announcement is being received.
Notes
!You can also turn the TA function on or off in the menu that appears with the pressing of
FUNCTION.
English
En | 9 |