Rear panel

1XLR INPUT

This jack accept XLR input connection, wire either balanced or unbalanced.

The signal of XLR INPUT is summed together with TRS INPUT through a balanced input amplifier. So, either may be used as an input or mixed together. Input specifications apply to both inputs.

The INPUT CONNECTIONS wiring chart of XLR connector is following:

Pin 1: GND

Pin 2: HOT

Pin 3: COLD

2TRS INPUT

This jack accepts a TRS connector, wire either balanced or unbalanced.

For balanced wiring, a 3-conductor TRS plug is necessary. The INPUT CONNECTIONS wiring chart of TRS connector is as following:

Tip: HOT (+)

Ring: COLD (-)

Sleeve: GND

Unbalanced wiring works with either a 2 or 3-conductor TRS connector. A 2-conductor TRS plug automatically ground the minus signal input, whereas a 3-conductor TRS plug wired unbalanced provides the option of leaving the minus open or grounded. We recommend that you grounded the unused input.

The TRS INPUT is summed together with XLR INPUT through a balanced Input amplifier. So, either may be used as an input or mixed together. Input specifications apply to both inputs.

3 VOLUME Control

Use the Volume Control to set the output sound pressure from VL-X5 to proper level required.

4 POWER LED

< MIN >

< MAX >

When power of VL-X5 is on, the LED will be light up. When power of VL-X5 is off, the LED will be turned off.

8 TASCAM VL-X5 Owner's Manual