PYLE Audio PYD1939 Your Pyle PRO Series Performance Mixer, Features and Controls PYD1919 Mixer

Your PYLE PRO Series Performance Mixer

is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use. Wide range volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording.

Features and Controls: PYD1919 Mixer

Please read this manual thoroughly before you attempt to set up and use the mixer. It contains a range of suggestions and instructions to insure safe usage. Set up and used properly, you can expect years of trouble-free service from this product.

Owner’s Manual Table of Contents

Input/Output Features: all models

MIC 1 Combo Input Jack For connecting a balanced or unbalanced low impedance microphone with XLR- type or 1/4” plug

MIC 2 Input Jack (on input panel) For connecting a balanced or unbalanced low impedance microphone with 1/4”plug

MIC Frequency Kill Switches Allows you to kill the selected frequency range instantly for interesting effects. LED lights to indicate kill is activated.

MIC Talkover Allows you to lower the level of the input sources so you can talk them using the DJ Mic

MIC1/2 Level Controls Lets you control the MIC levels as they enter the mix

MIC1/2 Tone Controls

Channel Gain Control Lets you adjust the gain of the input source

Channel Input Selector Lets you choose the input source to play for each channel

Channel CUE Switch Allows you to monitor the selected audio input source and prepare it prior to mixing it in.

Dual Display Meter Indicates the levels of Left and Right Master Channels

10-Band Equalizer Allows you to tailor the mixer output to suit your taste or performance environment. Each frequency range can be cut or boost by up to 10dB.

BNC Lamp Adaptor Allows you to connect a 12V/3W lamp to light the panel

Power Switch and Red light Illumination

Equalizer On/Off Switch

Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler, etc. and either play the signal from it or play another input through it.

Headphone Level Control

Headphone Jack Accepts headphones with 1/4” plug

Headphone CUE/PGM Control Allows you to listen simultaneously or separately to the CUE material or the active program

Zone Level Control Lets you control the mixer’s overall ZONE volume level, if you set up remote speakers or DJ booth monitors

Zone Mono/Stereo Selector

Zone Balance Control

Master Level Control Lets you control mixer’s overall volume level

Master Mono/Stereo Selector

Master Balance Control

Channel Assign Switch Lets you select the input source to be mixed by the Crossfade Slider Control

Crossfade Slider Control Allows you to smoothly switch between the input sources assigned to Channel A and Channel B

Output Jacks to connect the mixer to a receiver or amplifier – choose to use cables with either 1/4” plugs or RCA plugs.

Zone Output Jacks to connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location

Record Output Jacks to connect the mixer to a tape deck for recording the mixed program

Dual Purpose Stereo Inputs for using a turntable with a magnetic cartridge OR a high level input source

Input Select Switches – set these switches based on what is plugged into Phono1/Line1 and Phono2/Line3 input jacks

Ground Screw for turntables

MIC2 Microphone connector permits you to connect a balanced or unbalanced low impedance microphone with 1/4” plug.