TC electronic SDN BHD NM-1 user manual Appendixtechnical Specifications, Analog Inputs Environment

APPENDIX:TECHNICAL SPECIFICATIONS

Analog Inputs		Environment
Connectors:	¼" phone jacks w. mono sense	Operating Temperature:		32° F to 122° F (0° C to 50° C)
Input Type:	Single-ended	Storage Temperature:		-22° F to 167° F (-30° C to 70° C)
Impedance:	1 MOhm	Humidity:		Max. 90 % non-condensing
Max. Input Level:	10 dBu @ 12V supply
		General
Analog Outputs		Finish:		Anodized aluminum front
Connectors:	¼" phone jacks with mono sense			Plated and painted steel end caps
Max. Output Level:	10 dBu @ 12V supply	Dimensions:		130 x 130 x 55 mm
Output Type:	Balanced/Single ended with ground sense	Weight:		765 g
Impedance:	0 Ohm	Mains Voltage:		100 to 240 VAC, 50 to 60 Hz
Sense Input Impedance:	225 Ohm			(auto-select) AC wall adapter.
				AC adapter supplies 12VDC
Overall Data				minimum 0.3 A to pedal
D to A Conversion:	24 bit, 128 x oversampling bitstream	Power Consumption:		<5 W
A to A Delay:	1.65 ms
Dynamic Range:	106/98 dB, 20 Hz to 20 kHz	Warranty
	@ Input level 16/-2 dBu, not A-weighted	Parts and labor:		1 year
THD	< -90 dB (0.0032 %) @ 1 kHz, I/O Level
	16 dBu, Load > 2400 Ohm
Frequency Response:	+0.1/-0.2 dB, 20 Hz to 20 kHz
Crosstalk:	< -100 dB, 20 H z to 7 KHz, < -94 dB,
			Due to continuous development, these
	7 kHz to 20 KHz
			specifications are subject to change
EMC			without notice.
Complies with:	EN 55103-1 and EN 55103-2 FCC part 15,
	Class B, CISPR 22, Class B

33