Philips AEA3000 user manual Get started, Install/replace microphone batteries

Page 7

3 Get started

Always follow the instructions in this chapter in sequence.

English

Install/replace microphone batteries

Caution

•• Risk of explosion! Keep batteries away from heat, sunshine, or fire. Never discard batteries in fire.

•• Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.

•• Batteries contain chemical substances, so they should be disposed of properly.

1Open the battery compartment and take out the battery cartridge.

2Insert 3 x AAA batteries (supplied) into the cartridge with correct polarity (+/-) as indicated.

3Push back the battery cartridge, then close the battery compartment.

Note

•• If you are not going to use the microphone for a long time, remove the batteries.

•• New batteries installed in the microphone support up to 30 hours of continuous use.

•• When the power indicator flashes red, it indicates that

the power level is low and you need to replace the batteries.

EN 5

Image 7
Contents Register your product and get support at Always there to help youPage Contents Information about the use of batteries SafetyEnvironmental information Overview of the unit Your Wireless Microphone and ReceiverIntroduction Whats in the boxGet started Install/replace microphone batteriesAlways follow the instructions in this chapter in sequence Play »» The Bluetooth indicator on the receiver flashes blueConnect your iPad to the receiver Optional Enjoy music from an existing Hi-Fi system Product information SpecificationsNo sound or poor sound Adjust volume on the iPad TroubleshootingAll rights reserved AEA3000UM00V1.0