PYLE Audio PDWM2200 user manual Contents, Precautions

Page 2

Thank you for choosing our VHF wireless microphone system. We strongly suggest that you carefully study these instructions before attempting to operate the system.

CONTENTS

P1----------

Precautions

P2----------

Handheld microphone

P3----------

Belt Pack transmitter

P4----------

Receiver

P5----------

Installation

P6----------

Specifications

P7----------

Troubleshooting

PRECAUTIONS

1.Avoid exposure of the system to rain or moisture.

2.No user-serviceable parts inside the system. Refer all servicing to a qualified technician only.

3.Handle the microphone carefully, dropping or other shocks may cause failure.

4.Avoid using the system where it may be subjected to heat, such as in direct sunlight, near radiators or other heat sources.

5.Should any liquid be spilt on the system, stop using it immediately. It may be possible to dry the system, but you should have it checked by a qualified technician before using it again.

6.Take care with the mains power adapter and lead. If damaged in any way, do not use the system, and refer to a qualified technician for repair.

7.Only use the system with the supplied components, do not attempt to use with any other mains power supply adapter or microphone.

8.If the microphone is not going to be used for a time, remove the battery to prevent leakage. In the event of electrolyte leakage inside the battery compartment, carefully remove using a damp cloth. Take care not to get battery electrolyte in contact with your skin, however, if it does, wash your hands under a running tap. If electrolyte comes into contact with your eyes, seek medical advice immediately.

9.Only replace the battery with the same or an equivalent type.

10.Please dispose of old batteries in an environmentally friendly manner in accordance with the relevant legislation.

11.Do not use any solvents to clean any part of the radio microphone system.

1

Image 2
Contents PDWM2700 Contents PrecautionsHandheld Microphone Trouble ShootingWireless microphone fails fo work Working range is limitedOverall system SpecificationsBelt Pack Transmitter ReceiverReceiver InstallationTo connect the wireless microphone to your amplifier system