Metra Electronics 95-7951 installation instructions Units to the assembly using

Kit Assembly 95-7951

Stacked ISO mount units provision

1.	Locate the factory wiring harness in the
	dash. Metra recommends using the
	proper mating adapter from Metra or
	AXXESS. Re-connect the negative
	battery terminal and test the unit for
	proper operation.
2.	Snap the Double DIN brackets to the
	outside edge of the Double DIN trim
	plate. (Figure E)
3.	Slide the stacked ISO units into the
	bracket/trim plate assembly and secure
		(Figure E)
	the units to the assembly using the
	screws supplied with the units.
	(Figure F)
4.	Reassemble dash in reverse order
	of disassembly.

(Figure F)

10