PRODUCT SPECIFICATION SHEET
SERIES | DESCRIPTION | CATEGORY |
XM | 6 CHANNEL 600W POWERED MIXER | POWERED MIXERS |
XM 610 |
FEATURES (continued)
>Brilliant sound quality from the advanced circuit design, utilizing low noise operational amplifiers.
>Durable ABS plastic enclosure is road tough insuring reliable performance from night to night and venue to venue.
>Convenient oversize, sure grip handle make the unit easy to carry.
>
540mm
338mm
FRONT
348mm
SIDE
ARCHITECT’S & ENGINEER’S SPECIFICATIONS
The Samson XM610 shall be a 6 channel powered mixer. There shall be 6 mic/line channels with 3 band EQ. Each channel shall have a 20dB pad. Each channel shall have 2 aux sends, 1 to the monitor output and 1 to the DSP. The DSP shall have 100 programs of digital effects with a level control to send the DSP signal to the main bus. In the Main section, there shall be an Aux input with volume control going directly to the main amplifier section. There shall be a tape in and a tape out with level control. There shall be an Aux 2 send that bypasses the DSP. There shall be a footswitch jack provided for muting the DSP. There shall be a main mixer output before the amplifier section. The unit shall supply phantom power to the mic inputs. There shall be a monitor output getting its signal from the aux 1 send. There shall be a 7 band EQ for the monitor output. There shall be a 7 band EQ deriving its signal from the main bus. There shall be a
3 position switch to feed the main and monitor bus to the
2 amplifiers as Main / Main in amp 1 and 2, Main / Monitor in amp 1 and 2, and Main signal / bridged to amp 1 and 2. There shall be output metering on LED’s with clip indicators.
XM 610 SPECIFICATIONS
Rated Output power | 300W/4Ω@0.1% THD at |
| 1KHz per amplifier |
Frequency response | |
| Output into 8Ω (AMP OUT); |
| 20 Hz~20KHz+/- |
| 0.4dB@+4dB Output into |
| 10kΩ (MAIN OUT, MONITOR |
| OUT, AUX 2 SEND) |
Total Harmonic Distortion | Less than 0.06% @ 20Hz~ |
| 20KHz, 75W output into |
| 4Ω (AMP OUT); Less than |
| 0.1%@20 Hz~20KHz +4dBu |
| output into 10KΩ (MAIN OUT, |
| MON OUT, AUX 2 SEND) |
HUM & Noise | |
(Average, RS+150Ω) | |
| (MAIN OUT, MONITOR OUT, |
| AUX 2 OUT) |
(with 22Hz~22KHz BPF) | |
| OUT) Master level control at |
| maximum, all channel level |
| controls at minimum; |
| (AUX 2) Master level control |
| at maximum, all channel level |
| controls at minimum |
Maximum Voltage Gain | 67dB CH IN (MIC) to AMP OUT |
48dB CH IN (MIC) to MAIN OUT, MONITOR OUT | |
54dB CH IN (MIC) to AUX 2 OUT | |
30dB CH IN (MIC) to REC OUT | |
32dB CH IN (LINE) to MAIN OUT, MONITOR OUT | |
26dB AUX IN to MAIN OUT |
|
24dB TAPE IN to MAIN OUT |
|
Crosstalk 1KHz | 70dB adjacent input, 70dB |
| input to output |
Input Channel Equalization |
|
HIGH | 12KHz shelving (+/- 15dB |
| maximum) |
MID | 2.5KHz peaking (+/- 12dB |
| maximum) |
LOW | 80Hz shelving (+/- 15dB |
| maximum) |
Meters | 7 POINT LED METERS |
| |
Graphic Equalizer | 7 bands (63, 160, 400, 1K, |
| 2.5K, 6.4K, 16KHz) |
Internal DSP Effects | 24 BIT - 10 Presets each: |
| 1 - Performance; 2 - Hall |
| Reverb, 3 - Plate Reverb; |
| 4 - Spring Reverb; 5 - Echo; |
| 6 - Flange + Verb; 7 - Chorus |
| + Verb; 8 - Echo + Verb; 9- |
| Chorus; 10- Flange |
Phantom Power | +48V |
CLIP Indicators | Turn on: THD> 0.1% |
Foot Switch | DIGITAL EFFECT MUTE: ON/OFF |
Power Requirement | |
Power Consumption | 350W 1/8 power, 900W MAX. |
Weight | 40 lbs. (18.2Kg) |
Dimensions (W x H x D) | 21 1/4” x 13 1/4” x 13 3/4” |
| 540mm x 338mm x 348mm |