Fender Music Mixer owner manual Amp menus, 4fender .com

Amp menus

Use the Amp menus to select a different amplifier type for the current preset and adjust all amplifier set- tings, or to import the amp type (with all amp set-

tings) from another preset.

Amp Type—Use the Amp type menu to select one of the fol- lowing 22 amplifier types:

Blackface™ Clean

Blackface™ Drive

Blackface™ Distorted

Jazzmaster™

Garage Rock

Garage Punk

Very Distorted

British Jangle

British Blues

British Steel

Modern Crunch

Modern Metal

Modern Shred

Hot Rod™ Grit

Hot Rod™ Lead

Acoustic Dreadnought Mahogany

Acoustic Jumbo

Acoustic Dreadnought Rosewood

Acoustic Parlor (small body)

Tweed Clean

Tweed Drive

Tweed Dirt

Gain (Piezo Mix)—Use the Gain menu to adjust the amount of preamplifier gain and signal distortion. Use the Piezo Mix menu to blend the sound of an unamplified acoustic guitar with the sound of an acoustic guitar through a piezo pickup; rotate fully counter-clockwise for 100% unamplified, rotate fully clockwise for 100% piezo.

♫The GAIN menu will change to PIEZO MIX only when one of the four Acoustic amplifier types is selected in the AMP TYPE menu, to provide an amplifier feature more appropriate for acoustic guitar playing styles.

Amp Volume—Use the Amp Volume menu to adjust the loudness of the selected guitar amp type.

Treble—Use the Treble menu to adjust the high-frequency tone of the selected amplifier type.

Middle—Use the Middle menu to adjust the mid-frequency tone of the selected amplifier type.

Bass—Use the Bass menu to adjust the low-frequency tone of the selected amplifier type.

Compressor—Use the Compressor menu to select a level of signal compression.

♫Compression is used to "squeeze" the volume range of a signal to reduce high volume spikes and boost low volume sustain.

Timbre—Use the Timbre menu to select one of the following timbre types:

None

Full Body

Full Stack

Razors Edge

Bright Light

Bass Boost

New Metal

Super Bright

♫Use Timbre to apply a complete tone adjustment in one simple step.

Noise Gate—Use the Noise Gate menu to select one of four a noise gate levels.

♫Use Noise Gate to reduce the background static that can be especially annoying when playing softly.

Import—Use the Import menu to copy the amplifier type and all the amp settings from another preset to the current preset.