DigiTech HT-2 manual Normal Mode

Page 16

(Normal Mode)

To tune your guitar or bass, do the following:

1.Press the Foot Switch to turn the tuner on. A dash appears in the Note Display until a note is played.

2.Play a note with your instrument. The note being played dis- plays in the Note Display. If it is a sharp note, a decimal point lights in the lower right of the note display (i.e. G. = G#).

3.Begin adjusting the tuning of your instrument based on the behav- ior of the LED array. If LEDs to the left of the blue LED are lit, the note is flat and needs to be tuned up. If LEDs to the right of the blue LED are lit, the note is sharp and needs to be tuned down. When only the center blue LED is lit, the note is in tune.

4.Continue to tune the rest of your strings in the same manner.

5.When tuning is complete, press the pedal Foot Switch to bypass the Tuner.

12

Image 16
Contents Page Declaration of Conformity Warranty Page Introduction Included ItemsPage What Does This Do? Page Connecting the Tuner Page Amplifier Setup Select a Tuner Reference Select a Display Mode Page Tuning Your Instrument Strobe ModeNormal Mode Battery Operation Foot Switch HardWire Performance Accessories Hook-and-loop Pedalboard Pad Foot Switch Glow Sticker Specifications Page South Sandy Parkway Sandy, Utah PH 801 FAX 801