(F)
Bottom View
Hand or Finger catching hazard
(H)
3.Place the piano on the front half of the stand so that the metal fitting holes are seen when viewed from the top. Slide the piano backward while holding it with one hand so that it does not incline and fall from the stand. The hooks on the piano are then engaged with the metal fittings on the Side Panels. Pay attention so that your hand or fingers are not caught between the stand and piano. Fasten the piano and the stand with four bolts (F).
CAUTION: Be sure to secure the piano to the stand with the screws. If you fail to do so, the unit could fall from the stand causing damage or personal injury.
4.Insert the pedal connection cord that comes from Pedal Board (C) into the piano’s pedal jack and fasten with cord clamps.
5.Turn the Adjuster (installed on the bottom of C) until it touches the floor to support the pedal board.
– 7 –