9. JACKS
Jacks
MIDI JACKS
These jacks are used to connect external MIDI devices with the CN piano.
There are three terminals: MIDI IN, MIDI OUT, and MIDI THRU.
USB JACK
This jack is used to connect with a personal computer and exchange MIDI data.
LINE OUT JACKS
These jacks provide stereo output of the piano’s sound to amplifiers, tape recorders or similar equipment.
The audio signal coming through the LINE IN jacks is also routed to these jacks. The piano’s sound is mixed with the LINE IN signals.
The CN piano’s VOLUME slider can control the output level of its own sound while it does not control the LINE IN signal.
LINE IN JACKS
These jacks are used to connect a pair of stereo outputs from other audio equipment or electronic instruments to the piano’s speakers.
The audio signal coming through these jacks bypasses the piano’s volume control. To adjust the volume level, use the output control of the external device.
HEADPHONE JACKS
There are two jacks for headphones provided at the left end on the bottom of the piano.
You can hear the piano’s sound as well as any audio signal that is coming through the LINE IN.
BOTTOM VIEW
46 | KAWAI DIGITAL PIANO CN4 |