Amps
XTi Series
23
XTi Range
XTI1000
XTI serie amplifier 2x 500W/4 ohm, DSP speaker presets |
| € | 679 | ||
XTI2000 |
|
|
|
|
|
XTI serie amplifier 2x 800W/4 ohm, DSP speaker presets |
| € | 945 | ||
XTI4000 |
|
|
|
|
|
XTI serie amplifier 2x 1200W/4 ohm, DSP speaker presets |
| € | 1.325 | ||
XTI6000 |
|
|
|
|
|
XTI serie amplifier 2x 2100W/4 ohm, DSP speaker presets |
| € | 2.485 | ||
Minimum Guaranteed Power, 1 kHz | XTi 1000 | XTi 2000 | XTi 4000 | XTi6000 | |
per channel, both channels driven |
|
|
|
|
|
2 ohms Dual (per ch.) | 700W** | 1000W** | 1600W** | 3000W* | |
4 ohms Dual (per ch.) | 500W* | 800W* | 1200W* | 2100W | |
8 ohms Dual (per ch.) | 275W* | 475W* | 650W* | 1200W | |
1400W** | 2000W** | 3200W** | 6000W | ||
1000W* | 1600W* | 2400W* | 4200W | ||
*With 0.5% THD.**With 1% THD.
Amps
Features XTi Series | Speaker Tunings |
ıIntegrated proprietary DSP with LCD front panel display
ıAccurate, uncolored sound with very low distortion for the best in music and voice reproduction
ıAdvanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating,
ıExtremely versatile, handling a wide range of speaker impedances and outputs
ı
ıSpeaker presets for crossover frequencies, EQ, limiting, and delay
ıAll products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less)
ıSpeakon® and binding post outputs, XLR inputs and loopthrus
ıComprehensive LED status per channel
ıJBL loudspeaker presets specifically tailored for use with Crown’s XTi Series of power amplifiers are available in the form of System Architect device files.