Pioneer CDJ-350 manual Using the Multi Player As a Traktor PRO controller

Using the Multi Player

as a TRAKTOR PRO controller

After the equipment has been connected, turn on the power for each device, then configure the TRAKTOR PRO and the Multi Player according to the following procedure.

Downloading the MIDI mapping file

1 Download the MIDI mapping file from the Pioneer website: http://pioneer.jp/support/download/dj/cdj-350/Since the download file is in the zip compressed format, extract the file before proceeding.

Windows users

Right click the download file and select [Extract All].

After the expansion wizard is displayed, specify the destination folder for the extracted files.

Macintosh users

Double click the download file to expand.

After the zip file is extracted, the file PIONEER_CDJ-350.tsi will be extracted.

Configuring the Multi Player

[DISPLAY (UTILITY)] button

[ ] button

TIME MODE

AUTO CUE

DISPLAY

USB

STOP

UTILITY

SOURCE SELECT

MP3/AAC

WAV/AIFF

BACK

SELECT PUSH

DISC

PLAYLIST BPM LOCK

Rotary selector

2 Configure the Multi Player’s MIDI channels.

1Press and hold the [DISPLAY (UTILITY)] button for 1 second or longer to switch to UTILITY mode.

2Turn the rotary selector and select [MIDI CH]. Press the rotary selector to choose your selection.

3Turn the rotary selector and select a MIDI channel (1–4). Press the rotary selector to choose your selection.

The initial configuration of the MIDI mapping file will map the MIDI channels to corresponding TRAKTOR PRO decks as shown in the following table.

CDJ-350 MIDI channel	TRAKTOR PRO deck
MIDI CH 1	Deck A
MIDI CH 2	Deck B
MIDI CH 3	Deck C
MIDI CH 4	Deck D

The MIDI channel for the multi-player is set to CH 1 (Channel 1) by factory settings. Following the mappings in the table above, set each CDJ-350 MIDI channel you wish to use to one of the channels between CH 1 and CH 4.

4Press the rotary selector again to save the changes to the MIDI channel configuration. Press the [DISPLAY (UTILITY)] button to exit UTILITY mode.

3 Press and hold the [ ] button on the Multi Player for 1 second or longer to switch the Multi Player to control mode. “CONTROL MODE” will appear in the main unit’s display console.

Set the CDJ-350 to control mode on all units you wish to use.

4