MOUNTING THE CLIP HANGER
You can hang the microphone on your CB’s existing mounting bracket, or use the supplied clip hanger and screws.
To mount the clip hanger, use it as a tem- plate and drill two holes at the desired lo- cations on the vehicle’s dashboard. Then use the supplied screws to mount the clip hanger on the dashboard.
Caution: Be sure not to drill into objects behind the dashboard.
CONNECTING THE MICROPHONE
Plug your microphone’s
USING THE
MICROPHONE
Push the switch on the microphone’s side to send a transmission. Release the switch to receive.
USING THE AMP
To use the microphone’s internal pream- plifier, set AMP. ON/OFF to ON. Adjust VOL. to vary the output level of the ampli- fier. To turn off the amplifier, set the switch to OFF.
Note: The VOL. setting only affects your transmitting volume and only works with AMP. ON/OFF set to ON.
2