Pioneer S-DV333, XV-DV434, S-DV434SW, S-DV434ST Additional information Troubleshooting, General

Page 44

10Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

•If the system does not operate normally due to external effects such as static electricity disconnect the plug from the outlet and insert again to return to normal operating conditions.

General

Problem

Remedy

The power does not

• Disconnect the power plug from the outlet, and insert again.

turn on.

• Make sure there are no loose strands of wire touching the unit. This could

 

cause the system to shut off automatically.

 

 

No sound is output

• If you’re using the line input, make sure the component is connected

when a function is

correctly (see Connecting auxiliary components on page 29).

selected.

• Press MUTE on the remote control to turn muting off.

 

 

No image is output

• Make sure the TV is connected correctly (refer to the Setup Guide).

when playing discs.

• Reset the video output to interlace (see Video Output settings on page 25).

 

 

No sound from

• Refer to Setting the channel levels on page 22 to check the speaker levels.

surround or center

• Check that you haven’t selected the STEREO sound mode (see Listening in

speakers.

surround sound on page 11).

 

• Connect the speakers properly (refer to the Setup Guide).

 

 

Can’t operate the

• Replace the batteries (refer to the Setup Guide).

remote control.

• Operate within 7 m, 30° of the remote sensor (refer to the Setup Guide).

 

• Remove any obstacles or operate from another position.

 

• Avoid exposing the remote sensor on the front panel to direct light.

 

• You won’t be able to use the remote sensor of this unit with the CONTROL

 

IN jack of this unit connected to the CONTROL OUT jack of your plasma

 

display. You can use the remote sensor of the plasma display (even in

 

standby) as long as the power isn’t switched off.

 

 

Timer indicator is

• Unplug the unit, then plug back in. Wait for one minute then switch on.

blinking and the

• Make sure the fan at the rear of the unit is not being blocked.

system will not switch

• Check that the speakers are connected correctly.

on.

• Make sure the voltage of the mains power source is correct for the model.

 

• If the problem persists, take it to your nearest Pioneer authorized service

 

center or your dealer for servicing.

Snd Demo shows in the display and the unit can’t be controlled.

• Press and hold (stop) on the front panel for about five seconds. The disc tray ejects automatically to indicate the Sound Demo mode is disabled.

44

En

Page 43 Page 45
Image 44
Page 43 Page 45
Contents DV434S-DV434STS-DV434SW Ventilation Caution Location underside of the unitOperating Environment POWER-CORD Caution All other modelsContents Initial Settings menu Other connectionsControls and displays Additional informationHome theater sound setup Using the Auto Mcacc setup for optimal surround soundGetting started Getting started ChapterGetting started Using the on-screen displaysSetting the clock Menu Playing discsBasic playback controls Listening to the radio Resume and Last MemoryVideo CD/Super VCD PBC menus DVD-Video disc menusListening to station presets System SetupListening to other sources Improving poor FM receptionAuto listening mode Listening to your systemListening to your system Chapter About the listening modesUsing Front Surround Using Advanced SurroundAdjusting the effect level Dolby Pro Logic II Music settingsListening with headphones Using Quiet and Midnight Listening modesAdjusting the bass and treble Listening to your system Listening in stereoPlaying discs Zoom Select a view optionUsing repeat play Looping a section of a discUse the cursor buttons Enter to navigate To resume normal playback, select ‘Off’Using random play Using the OSDCreating a program list During playback, press Home Menu and select ‘Play Mode’Other functions available from the program menu Using the front panel displaySearching a disc Playing discs Switching subtitles Switching language / audio channelsSwitching camera angles Zooming the screenUsing the timer Using the timer ChapterSetting the wake-up timer Setting the sleep timerSurround and sound setup options Surround sound and other settings ChapterUsing the System Setup menu Surround sound and other settings Setting the channel levelsDTS CD setting TurnWhen youre finished, press Enter Video Adjust menu Video Adjust menuVideo Adjust menu Chapter Initial Settings menu Initial Settings menu ChapterUsing the Initial Settings menu Video Output settingsInitial Settings menu Options settingsLanguage settings Display settingsAbout DivX VOD content Parental LockPlaying DivX VOD content Displaying your DivX VOD registration codeSelect ‘Display’ Your 8-digit registration code is displayedConnect the TV in jacks to the audio outs of your TV or VCR Other connectionsOther connections Chapter Connecting the S-video output Connecting external antennasRecording mode Other connectionsAbout progressive scan video Using the SR+ mode with a Pioneer plasma display Connected with an SR+ cablePress SR+ on the remote Display, useDisplay Controls and displaysControls and displays Chapter Controls and displays Front panelControls and displays Remote control Auto Setup Mcacc TIMER/CLOCKHome Menu AudioOptional system settings System Setup menu options in standbyAdditional information Additional information ChapterUsing and taking care of discs Disc / content format playback compatibilityAdditional information DVD Video regionsDivX video compatibility Disc compatibility tableAbout DivX About WMA Handling discsStoring discs Displaying DivX subtitle filesInstallation and maintenance Resetting the systemUsing the language code list Additional information Screen sizes and disc formatsSelect ‘Other Language’ Code numberAdditional information Language code list Country/Area code listLanguage Language code letter, Language code Country/Area, Country/Area code, Country/Area code letterAdditional information Troubleshooting GeneralDVD/CD/Video CD player STANDBY/ON buttonError Messages TunerAdditional information Specifications DV333 Speaker SystemAccessories DV434 Speaker SystemDV434ST Speaker System SubwooferDV434SW Speaker System ItalianoMm 10 mm Attaching the bracketsBefore mounting English Deutsch Français Italiano Nederlands Español 10 10 20 20 Page 設置喚醒定時功能 開啟 / 關閉喚醒定時器 設置睡眠定時器 請徹底閱讀本操作手冊，以便正確的操作您的產品。在閱讀完本手冊後，請將其妥為保管，便於 日後參考。Video 及 Jpeg 檔案 循環播放碟片某個片段 使用重複播放功能 使用隨機播放功能 建立程式編輯清單 視頻調整選單 組合運用選項系統設定值 安裝托架 安裝前使用 Auto Mcacc 設置功能， 重要事項連接麥克風至後面板上的 Mcacc MIC 插 孔。 請將麥克風放在您一般聆聽的位置上。開始操作 使用在屏顯示畫面 OSD設定時鐘 如果接收機電源關閉，請按下基本播放控制 01 開始操作碟片播放 收聽收音機 Resume 及 Last MemoryVideo CD/Super VCD PBC 選單 DVD-Video 碟片選單聆聽其他來源 收聽預設電台改善 FM 接收不良 記憶電台用心聆聽您的系統 關於聆聽模式自動聆聽模式 聆聽環繞聲02 用心聆聽您的系統 使用前環繞聲 Front Surround使用先進環繞聲功能 Dolby Pro Logic II Music 設定值用心聆聽您的系統 調整效果程度 以立體聲聆聽戴上耳機聆聽 使用 「音場補正等化器」聆聽02 用心聆聽您的系統 調整低音及高音 加重低音音量以選取 「Bass 低音 」或 「Treble 高音 」。碟片掃描 播放 Jpeg 幻燈片秀Video CD/Super VCD 碟片 03 碟片播放使用 「碟片導向」瀏覽 DVD 或 循環播放碟片某個片段 使用重複播放功能使用 OSD 功能 建立程式編輯清單使用隨機播放功能 使用前面板顯示功能 搜索碟片程式編輯選單中其他可用的功能 放大畫面 切換字幕切換語言 / 聲道 切換拍攝角度 顯示碟片資訊設置睡眠定時器 使用定時功能設置喚醒定時功能 使用 System Setup 系統設置 選單 環繞聲及音效設置選項SW 重低音 DRC Mid 中度範圍設定值DTS CD 設定值 選取聆聽模式。按下 Test Tone 以聆聽測試音調。 音量至適度的範圍。Pioneer 電漿顯示器的 SR+ 設置 當坐在主要聆聽位置上，您應該會聽到來自每 個揚聲器同樣音量的測試音調。聲道音量範圍± 10 dB。 以選取來源 DVD、 TV、 L.1 或「視頻調整」選單 視頻調整選單Home Menu 退出功能畫面。 Enter 來完成設置。按下 Home Menu 並選取 「初始設 07 「初始設置」選單使用初始設置選單 DVD 選單語言 台灣機種成人鎖定 「初始設置」選單 關於 DivX VOD 內容播放 DivX VOD 內容 按下 Home Menu 並選取 「初始設 置」。 選取 「選項」，然後是 「DivX VOD」。08 其他接線 連接輔助設備其他接線 連接 S-video 輸出連接外部天線 錄製模式08 其他接線 使用色差視頻輸出連接 關於逐行掃描視頻本機 與逐行 掃描視 頻 Macro Vision System Copy Guard 相容。2 434HDG。其他接線 本機與 Pioneer 電漿顯示器的 組合運用 SR+ 模式與 Pioneer 電漿顯示器的組合調諧器指示燈 09 控制與顯示數位格式指示燈 控制與顯示 前面板09 控制與顯示 遙控器 功能選取按鍵碟片播放控制 游標按鍵、ENTER 及調諧按鍵Setup Mcacc 13 自動設置多聲道音場補正功能 Auto18 環繞聲模式 / 音效增強按鍵 CLR EnterATT 6dB 衰減 6dB 可將訊號位準降低 待機狀態下的 System Setup 系統設置 選單選項Demo On 可將展示功能啟用。 Demo Off 可將展示功能關閉。 DVD Video 適用地區 Auto , PAL 及 Ntsc 。10 其他資訊 碟片相容性參照表關於 DivX DivX 視頻相容性其他資訊 手拿碟片時副檔名：.avi 及 .divx 必須使用這些副檔 ，以利本機辨識 DivX 視頻檔案 。請注安裝及保養 重新設置系統畫面大小及碟片格式 使用語言代號清單將系統切換成待機狀態。 按下前面板上的 按鍵。10 其他資訊 語言代號清單 國家 / 地區代號清單當本機的 Control in 插孔與您電漿顯示器的 Control OUT 插孔連接 其他資訊 故障排除一般問題 DVD/CD/Video CD 播放器 STANDBY/ON 按鍵將電源打調諧器 錯誤訊息DV333 揚聲器系統 DV434 揚聲器系統 DV434ST 揚聲器系統其他機種： 重低音DV434SW 揚聲器系統 額定阻抗 頻率範圍最大輸入功率 100 W 尺寸 寬 x 90 高 x 100 深 mm 重量 .8 公斤 為求產品改良，規格及設計如有變更，恕不 另行通之。安裝托架 安裝前Pioneer Corporation

XV-DV333, S-DV434ST, S-DV434, S-DV333, S-DV434SW specifications

The Pioneer XV-DV434, S-DV434ST, S-DV434SW, and XV-DV333 are noteworthy entries in the realm of home entertainment systems, reflecting Pioneer's commitment to quality audio and video performance. Each model showcases a blend of advanced technologies and features designed to enhance the user experience.

The Pioneer XV-DV434 is a versatile 5-disc DVD changer that not only plays DVDs but also supports CD and MP3 playback. Equipped with a sleek, user-friendly interface, it allows for easy navigation through media. One of its standout features is the Progressive Scan function, which significantly enhances video quality by reducing motion blurriness and improving overall sharpness. Additionally, it boasts Dolby Digital and DTS surround sound decoding, creating an immersive audio experience that complements the high-quality video output.

The S-DV434ST and S-DV434SW models are part of a compact home theater system that integrates seamlessly into any entertainment setup. The S-DV434ST includes satellite speakers designed to deliver clear high frequencies, while the S-DV434SW features a powerful subwoofer that brings depth and richness to the sound. Together, they provide a dynamic audio environment ideal for movies, music, and gaming. The systems also include a variety of connectivity options, such as digital inputs, making them highly compatible with various devices like TVs, gaming consoles, and Blu-ray players.

Meanwhile, the XV-DV333 distinguishes itself with its capacity to handle multiple formats including DVD, VCD, SVCD, CD, and CD-R/RW discs. It features a robust built-in amplifier that supports multi-channel audio output, ensuring a rich soundstage. Its Quick Start feature allows users to jump straight into their favorite media without lengthy loading times. In addition, the XV-DV333 integrates fully with Pioneer's proprietary technologies for enhanced audio processing, allowing listeners to appreciate finer details in their favorite tracks and films.

Collectively, these models emphasize Pioneer's dedication to delivering top-notch performance while maintaining user-friendly designs. From cinema enthusiasts seeking high-quality visual and audio experiences to casual listeners searching for an intuitive and versatile system, the XV-DV434, S-DV434ST, S-DV434SW, and XV-DV333 provide excellent choices that cater to a wide range of needs, making them valuable additions to any home media setup.
Top Page Image Contents