2Operating a DJS Player, Start up DJS

1-2Operating a DJS Player

You can use your SEP-C1 to operate either Player A or Player B on the [DJ Play] screen.

1 Start up DJS.

• Once DJS starts up, the [DJ Play] screen is displayed.

2 Operate either Controller A or Controller B.

•When you operate the various controls on your SEP-C1, such as the jog dial or the tempo control slider, it operates the player in the [DJ Play] screen.

Controller A

Controller B

Functions that are Linked with the [DJ Play] Screen (Player Functions)

SEP-C1 Operation Buttons	Controls Linked on the [DJ Play] Screen
PLAY/PAUSE	PLAY/PAUSE Button
CUE	CUE Button
SEARCH	SEARCH Buttons
TRACK SEARCH	TRACK SEARCH Buttons
TIME/A.CUE	TIME MODE / AUTO CUE Button
IN/CUE	IN/CUE Button
OUT/ADJUST	OUT/ADJUST
RELOOP/EXIT	RELOOP/EXIT
MASTER TEMPO	MASTER TEMPO Button
TEMPO ±6/10/16/WIDE	TEMPO Control Range Button
TEMPO	TEMPO Control Slider
JOG (–REV/+FWD)	Jog Dial
PITCH BEND	PITCH BEND Button
SCRATCH	SCRATCH Button

For information on functions of buttons, please refer to “Parts and Their Functions” in the SEP-C1 operating instructions and in the DJS User Manual.

Note

Spin (when in scratch mode)

If you spin the jog dial of your SEP-C1 very quickly, even after you let go of it, it will continue playing at the speed and in the direction that the jog dial is rotating until it stops. You cannot do this spin play with the mouse.

Simultaneous Operations

The following operations can be performed at the same time from the SEP-C1.

・If you rotate the jog dial while holding down the SEARCH button, it accelerates the search play speed.

・While playing a cue point sample, if you hold down the CUE button, you can operate controls like the jog dial or the PITCH BEND button.

・When playing a cue point sample, if you hold down the CUE button and the press the PLAY button, even if you let go of the CUE button, it keeps on playing without returning to the cue point.

・When playing a cue point sample, if you hold down the CUE button and press a loop operating button (IN/CUE), the playback point is recorded as the cue point. When you release the CUE button, it returns to the cue point and stands by.

・When you are in the SCRATCH JOG mode, if you hold down the jog dial and press the CUE button, the playback point is recorded as the CUE point. When you release the jog dial, it returns to the cue point and stands by.

・When in the SCRATCH JOG mode, if you hold down the jog dial and press a loop operating button (IN/CUE), the playback point is recorded as the cue point. Even when you release the jog dial, it continues playing without returning to the CUE point.

Unlinked Player Functions

The following SEP-C1 buttons do not link up with the [DJ Play] screen.

・CUE/LOOP MEMORY Button ・CUE/LOOP CALL Button ・JOG DIAL Button

・EJECT Button

4DJS Ver. 1.601