Other connections
Chapter 8
Other connections
08
English
Connecting external antennas
For an external AM antenna, use 5 m to 6 m of
| Outdoor antenna | |
Indoor |
|
|
antenna |
|
|
|
| |
wire) | 5 m to 6 m | AM LOOP |
|
|
For an external FM antenna, use a PAL connector to hook up an external FM antenna.
PAL connector
Connecting auxiliary audio components
Using the stereo analog inputs, you can connect an external component such as a tape deck or MD player for playback through this system.
Tape deck, etc.
To audio
output
| CR/ |
|
|
|
|
|
COMPONENT | PR |
| LINE | R | FRONT L |
|
VIDEO |
| IN | OUT | CENTER | ||
VIDEO | CB/ | L |
| L CONTROL |
|
|
PB |
|
|
| |||
|
|
|
| OUT |
|
|
IDEO | Y | R |
| R |
|
|
|
|
|
| R SURROUND L | SUB | |
VIDEO OUT |
|
| AUDIO | WOOFER | ||
|
|
| SPEAKERS (4 Ω - 6 Ω) | |||
|
|
|
|
•Connect the AUDIO IN jacks to the analog outputs of an external playback component. Connect using RCA
Line Out options
The Line Out function allows you to determine how sound from LINE OUT terminals is
output.1
•Press LINE OUT to cycle through LINE ON and LINE OFF options, then press ENTER to confirm you selection.
•LINE ON – Multichannel sources are downmixed to 2.1 ch (stereo). A 2 ch downmix signal is produced from the LINE OUT terminal.
Deutsch Français Italiano Nederlands Español
Note
1• When the line out mode is on, most sound features cannot be used. The display will briefly blink LINE ON if you try and use a prohibited function while the line out mode is on.
•The line out mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
•This option is not effective when listening a source from LINE.
31
En