2 Press the [f] button to play the track.
3Move the channel fader away from you.
4Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator lights at the peak level.
5Turn the [MASTER LEVEL] control to adjust the audio level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. | Position |
HEADPHONES MIXING control | Center |
HEADPHONES LEVEL control | Turned fully counterclockwise |
|
|
1Press the headphones [CUE] button for the channel 1.
2Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate level.
Note
This unit and the Serato DJ software include a variety of functions enabling individualistic DJ performances. For details on the respective functions, see the operating instructions and the Serato DJ software manual.
!This unit’s operating instructions can be downloaded from the Pioneer DJ support site. For details, see Downloading this unit’s oper- ating instructions (p. 16).
!The Serato DJ software manual can be downloaded from “Serato. com”. For details, see Downloading the Serato DJ software manual (p. 16).
Quitting the system
1 Quit [Serato DJ].
When the software is closed, a message for confirming that you want to close it appears on the computer’s screen. Click [Yes] to close.
2Press the [STANDBY/ON] switch on this unit’s rear panel to turn this unit’s power off.
3Disconnect the USB cable from your computer.
Names of Parts
1Browser section
2Deck section
3Mixer section
4Effect section
Browser section
1 1 2 1 1
3
4
1LOAD button
2Rotary selector
3BACK button
4LOAD PREPARE button
14En