Tuner, ProblemRemedy, Problem Remedy | Pioneer SX-LX70SW instruction

Additional information

ProblemRemedy

No sound is output when an input function is selected.

•When playing back a source on the supplied HDD/DVD recorder, make sure that the settings for Audio Out (page 155), and the HDMI Output under Audio Output Setting (page 159) are all at their default values.

•If you’re using the line input, make sure the component is connected correctly and the volume level of your external component (i.e. a portable player, etc.) is adjusted (see Connecting auxiliary components on page 40).

•Turn up the volume.

•No audio is output from the speakers connected to this unit if HDMI Mode is set to Through Mode (page 43).

•No audio is output if a DVI component is connected via HDMI.

•Press MUTE on the remote control to turn muting off.

No sound from surround	• Refer to Channel level setting on page 37 to check the speaker levels.
speaker.	• Check that you haven’t selected the Stereo mode (see Listening in surround sound on
	page 31).
	• Connect the speakers properly (refer to Connecting up on page 8).
	• Verify the audio output and HDMI settings of your external component when connecting
	an external component via an optical digital cable or HDMI cable.

Can’t operate using the remote control.

•Replace the batteries (Putting the batteries in the remote control on page 26).

•Operate within 7 m, 30° of the remote sensor (Using the remote control on page 26).

•Remove any obstacles or operate from another position.

•Avoid exposing the remote sensor on the front panel to direct light.

•For operating the HDD/DVD recorder, make sure that the control cable and HDMI cable are connected (page 13).

•For operating the other Pioneer component connected to the CONTROL OUT jack of this receiver subwoofer, make sure that the control cable and either an HDMI or analog audio cable are connected (page 42).

Tuner

Problem	Remedy
Considerable noise in radio	• Connect the AM antenna (refer to Connecting up on page 8) and adjust the direction and
broadcasts.	position for best reception. You may also connect an additional internal or external AM
	antenna (refer to Connecting external antennas on page 42).
	• Fully extend the FM wire antenna, position for best reception, and secure to a wall. You
	may also connect an outdoor FM antenna (see Connecting external antennas on page 42).
	• Turn off other equipment that may be causing the noise or move it further away.

Auto tuning does not pick up some stations.

•The radio signal is weak. Auto tuning will only detect radio stations with a good signal. For more sensitive tuning, connect an outdoor antenna.

HDMI

Symptom	Remedy
No picture or sound.	• This receiver is HDCP-compatible. Check that the components you are connecting are
	also HDCP-compatible.
	• Depending on the connected source component, it’s possible that it will not work with
	this receiver (even if it is HDCP-compatible).
	• If the problem still persists when connecting your HDMI component directly to your
	monitor, please consult the component or monitor manual or contact the manufacturer for
	support.

No sound, or sound suddenly ceases.

•Check that the HDMI Mode setting is set to AMP Mode/Through Mode.

•If the component is a DVI device, use a separate connection for the audio.

•Check the audio output settings of the source component.

SX-LX70SW specifications

The Pioneer SX-LX70SW is a high-performance home theater receiver that combines advanced technology with user-friendly features to enhance the audio experience in any living space. This model is part of Pioneer's prestigious line of receivers, designed for audiophiles and casual listeners alike, making it a solid choice for those looking to elevate their home entertainment setup.

One of the standout features of the SX-LX70SW is its powerful amplifier section, delivering robust audio performance with a total output of up to 100 watts per channel. This ensures that every sound, whether it’s dialogue in a movie or the subtle notes of a symphony, is reproduced with stunning clarity and precision. Additionally, its 7.2-channel configuration provides ample power to drive multiple speakers, allowing for an immersive surround sound experience that envelops listeners in rich audio.

The SX-LX70SW incorporates advanced audio technologies like Dolby Atmos and DTS:X, which create a three-dimensional soundstage that adds depth and realism to any content. These technologies allow for sound to move around and above the listener, making action scenes in films or live concerts feel more engaging and lifelike.

Another key characteristic of the receiver is its extensive connectivity options. It features multiple HDMI inputs for easy integration with today's digital devices, including Blu-ray players, game consoles, and streaming devices. The built-in Wi-Fi and Bluetooth capabilities enable users to stream their favorite music services directly, providing easy access to thousands of songs without the hassle of wired connections.

The receiver’s interface is designed for ease of use, featuring an intuitive on-screen display that guides users through setup and customization. Additionally, the inclusion of a smartphone app allows for remote control and adjustments, offering added convenience for users who prefer managing their audio settings from a distance.

In terms of build quality, the SX-LX70SW is designed with durability in mind, ensuring long-term reliability. With its elegant finish and sleek design, it complements modern home entertainment systems, adding aesthetic value alongside its impressive functionality.

Overall, the Pioneer SX-LX70SW stands out as a versatile, high-performance receiver that marries cutting-edge technology with user-centric features, making it an ideal choice for anyone looking to enhance their home audio setup.

Additional information

ProblemRemedy

Tuner

Problem

Remedy

antenna (refer to Connecting external antennas on page 42).

HDMI

Symptom

Remedy

this receiver (even if it is HDCP-compatible).

SX-LX70SW specifications