Solid State Logic XR622 owner manual Performance Specification, F-4

Page 6

X-Rack Owner’s Manual

F.4

F.4.1

F.4.2

F.4.3

F.4.4

Performance Specification

The following page contains audio performance specification figures for the X-Rack Master module. No other Solid State Logic products are covered by this document and the performance of other Solid State Logic products can not be inferred from the data contained herein.

Measurement Conditions

For each set of figures on the following pages, the specific unit and test setup will be stated at the beginning of that section. Any changes to the specified setup for any particular figure(s) will be detailed beside the figures to which that difference applies.

Measurement References

 

Unless otherwise specified the references used in this specification are as follows:

•

Reference frequency:

1kHz

•

Reference level:

0dBu, where 0dBu ≈ 0.775V into any load

• Source impedance of Test Set:

50Ω

•Input impedance of Test Set: 100kΩ

•All unweighted measurements are specified as 22Hz to 22kHz band limited RMS and are expressed in units of dBu

•All distortion measurements are specified with a 36dB/Octave low pass filter at 80kHz and are expressed as a percentage

•The onset of clipping (for headroom measurements) should be taken as 1% THD

•Unless otherwise quoted all figures have a tolerance of ±0.5dB or 5%

•All measurements are made with the operating level switch set for +4dBu

Mix Bus Performance

 

Signal applied to one channel of an X-Rack Line Input module and routed to Mix Bus. Signal measured

on Mix Output. All other inputs un-routed from the bus under test. Mix Bus Gain control set to 0dB.

Gain

Continuously variable from –∞ to 0dB

THD + Noise

< 0.005% from 20Hz to 10kHz,

(+24dBu applied, 0dB gain)

< 0.008% at 20kHz

Frequency Response

±0.1dB from 20Hz to 20kHz

Equivalent Input Noise

–3dB at 150kHz

< –88dBu

(Input terminated with 150Ω)

 

Record Bus Performance

 

Signal applied to one channel of an X-Rack Line Input module and routed to Record Bus. Signal measured

on Record Output. All other inputs un-routed from the bus under test.

THD + Noise

< 0.005% from 20Hz to 20kHz

(+24dBu applied, 0dB gain)

±0.1dB from 20Hz to 20kHz

Frequency Response

Equivalent Input Noise

–3dB at 150kHz

< –88dBu

(Input terminated with 150Ω)

 

Page F-4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Solid State Logic U N D V I S I O NPage Operation IntroductionConnection Rack Master ModuleExpansion Configuration Dim LevelMonitor Section Midi Remote600Ω Output Level Compensation Default Midi Controller MappingLevel Compensation F-3Performance Specification F-4Mix Level Tracking Meter LevelIns Snd, Mix, Rec, Fol Mon Connector Details Ins Rtn, Ext, Mon, Alt MonHeadphones F-6Physical Specification Environmental SpecificationF-7 F-8
Related manuals
Manual 10 pages 32.72 Kb

XR622 specifications

The Solid State Logic XR622 is an advanced audio mixing console that represents the pinnacle of modern digital audio technology. Designed with both studio engineers and live sound professionals in mind, the XR622 thrives in a variety of environments, from high-end studios to dynamic live performance settings.

One of the main features of the XR622 is its powerful processing capabilities. With a high channel count, users can enjoy seamless mixing for complex productions. The console incorporates SSL's renowned SuperAnalogue technology, which ensures unprecedented audio quality and clarity. This technology is complemented by the console's dual-path architecture, allowing for both analog and digital signal processing, while maintaining the warmth and richness that SSL is famous for.

The XR622 is equipped with a highly intuitive user interface that streamlines the mixing process. Its large touchscreen displays provide visual feedback and control over mixing parameters, effects, and routing, facilitating a more efficient workflow. Additionally, the console features a multitude of physical faders, knobs, and buttons, ensuring tactile control for engineers who prefer a hands-on approach.

One of the standout characteristics of the XR622 is its extensive connectivity options. With multiple inputs and outputs, it supports various audio formats and can easily integrate into different audio networks. This versatility makes it an ideal choice for both large-scale events and smaller productions. Furthermore, the built-in multi-track recording capabilities mean that users can capture their sessions directly from the console, streamlining the production process.

In terms of onboard effects, the XR622 includes a comprehensive suite of high-quality processors including equalizers, compressors, and reverbs. This allows sound engineers to tailor their mixes dynamically, adding depth and texture without the need for external processing gear. This integrated approach helps save space and reduces setup complexity, making the XR622 a powerful tool for any audio production.

Additionally, the XR622 boasts advanced automation features, allowing for precise control over various mixing parameters. This can be especially useful in live settings where changes need to be made rapidly and accurately, providing engineers with the confidence that their mixes will translate reliably across different environments.

In summary, the Solid State Logic XR622 is a feature-rich mixing console that combines superior audio quality with cutting-edge technology and intuitive control. With its versatility, extensive connectivity, and comprehensive processing capabilities, it is an invaluable asset for audio professionals seeking to deliver exceptional sound quality in any setting.
Top Page Image Contents