Specifications

UTX-B2V/B2X Bodypack Transmitter

UTX-H2 Handheld Microphone

UTX-P1 Plug-on Transmitter

Oscillator		Crystal-controlled PLL Synthesizer		—
Type of emission		F3E

Carrier	U3032	566 MHz to 590 MHz (TV 30 to 33 channels), selectable from 188 frequencies (in 125-kHz steps)
frequencies
frequencies	U4244	638 MHz to 662 MHz (TV 42 to 45 channels), selectable from 188 frequencies (in 125-kHz steps)
	U4244

	CE62	798 MHz to 822 MHz (TV 62 to 64 channels), selectable from 189 frequencies (in 125-kHz steps)/960 frequencies (in 25-kHz steps)

	CE67	838 MHz to 862 MHz (TV 67 to 69 channels), selectable from 189 frequencies (in 125-kHz steps)/960 frequencies (in 25-kHz steps)

	AU66	792 MHz to 806 MHz (TV 66 to 67 channels), selectable from 102 frequencies (in 125-kHz steps)

RF power output		30 mW/5 mW (selectable)		50 mW

Antenna		1/4 wave length wire	1/4 wave length wire (internal)	Integral type

Pilot tone signal		32 kHz

Frequency response		40 Hz to 18 kHz (typical)	50 Hz to 18 kHz (typical)

Reference deviation		±7 kHz (-60 dBV, 1-kHz input)	±7 kHz (94 dB SPL, 1-kHz input)	±10 kHz (-60 dBV, 1-kHz input)

Signal-to-noise ratio		60 dB or more (±7-kHz deviation at 1-kHz modulation, A-weighted)		60 dB or more (±10-kHz deviation at 1-kHz modulation,
				A-weighted)

Microphone capsule		Electret condenser, omni-directional (UTX-B2V)	Dynamic, uni-directional	—
		Electret condenser, uni-directional (UTX-B2X)		—
		Electret condenser, uni-directional (UTX-B2X)

Audio attenuator adjustment range		0 dB to 21 dB (in 3-dB steps): Mic input	0 dB to 21 dB (in 3-dB steps)	0 dB to 21 dB (in 3-dB steps): Mic input

Audio input level		MIC: -60 dBV (at 0-dB attenuator level)	—	MIC: -60 dBV (at 0-dB attenuator level)
		LINE: +4 dBu	—	LINE: +4 dBu
		LINE: +4 dBu		LINE: +4 dBu

Audio input connector		3-pole mini jack	—	XLR-3-11C type

Max. input sound pressure level		—	151-dB SPL (at 21-dB attenuator level)	—

Indicators	LCD	Operating channel number/frequency, attenuator level, RF output level (High/Low), audio input status,		Operating channel number/frequency, attenuator
		transmitter battery status, and accumulated operating time		level, audio input status, RF output status, transmitter
				battery status, and accumulated operating time

	LED	Audio input status	Power status	Audio input status

Power requirements		DC 3.0 V (with two AA-size alkaline (LR6) batteries)

Battery life		Approx. eight hours with Sony’s AA-size alkaline (LR6) batteries at 77 °F (25 °C) at 30-mW output		Approx. six hours with Sony’s AA-size alkaline (LR6)
				batteries at 77 °F (25 °C) at 50-mW output

Dimensions (W x H x D)		2 1/2 × 3 1/4 × 3/4 inches (63 × 82.5 × 18.7 mm)	1 15/16 × 10 inches49 x 253 mm (49 x 253 mm)	1 3/4 x 4 x 1 7/16 inches (44 x 99 x 36 mm)
		excluding the antennas

Weight		Approx. 5.1 oz (145 g), including batteries	Approx. 11 oz (308 g), including batteries	Approx. 6.5 oz (185 g), including batteries

Supplied accessories		UTX-B2V: Omni-directional lavalier microphone,	Microphone holder (x1), operating instructions (x1)	Soft case (x1), operating instructions (x1)
		windscreen (x3), microphone holder clip (x1), belt clip
		(x1), operating instructions (x1)
		UTX-B2X: Uni-directional lavalier microphone (x1),
		windscreen (x1), microphone holder clip (x1), belt clip
		(x1), operating instructions (x1)

URX-P2 Portable Receiver

URX-M2 Tuner Module

Oscillator		Crystal-controlled PLL Synthesizer
Type of reception		Space diversity

Receiving	U3032	566 MHz to 590 MHz (TV 30 to 33 channels), selectable from 188 frequencies (in 125-kHz steps)
frequencies
frequencies	U4244	638 MHz to 662 MHz (TV 42 to 45 channels), selectable from 188 frequencies (in 125-kHz steps)
	U4244

	CE62	798 MHz to 822 MHz (TV 62 to 64 channels), selectable from 189 frequencies (in 125-kHz steps)/960 frequencies (in 25-kHz steps)

	CE67	838 MHz to 862 MHz (TV 67 to 69 channels), selectable from 189 frequencies (in 125-kHz steps)/960 frequencies (in 25-kHz steps)

	AU66	792 MHz to 806 MHz (TV 66 to 67 channels), selectable from 102 frequencies (in 125-kHz steps)

Antenna		1/4 wave length wire

Pilot tone signal		32 kHz

RF squelch level		15 dBµ	25 dBµ

Frequency response		40 Hz to 18 kHz (typical)

Reference deviation		±5 kHz (at 1-kHz modulation)

Signal-to-noise ratio		60 dB or more (±5-kHz deviation at 1-kHz modulation, A-weighted)

Audio output connector		3-pole mini jack, unbalanced-

Audio output level		-58 dBm	—

Monitor output connector		5/32 inch (3.5 mm) dia., stereo mini jack	—

Monitor output level		5 mW (at 16 Ω)	—

Indicators	LCD	Operating channel number/frequency, audio output status, RF input level, tuner battery status, and	Operating channel number/frequency, audio output
		accumulated operating time	status, RF input level

	LED	RF input status

Power requirements		DC 3.0 V (with two AA-size alkaline (LR6) batteries)	DC 9.0 V

Battery life		Approx. six hours with Sony’s AA-size alkaline (LR6) batteries at 77 °F (25 °C)	—

Dimensions (W x H x D)		2 1/2 x 4 1/8 x 7/8 inches (63 x 104.5 x 22 mm), excluding the antennas	2 1/4 x 1 1/16 x 4 7/8 inches (57 x 26 x 121 mm)

Weight		Approx. 7.2 oz (205 g), including batteries	Approx. 5.3 oz (150 g)

Supplied accessories		Shoe-mount adapter (x1), belt clip (x1), output cable (x1 each, 3-pole locking mini plug/XLR-type, 3-pole	Operating instructions (x1)
		locking mini plug/stereo mini plug), operating instructions (x1)

Use of wireless devices from Sony in the United States of America is regulated by the Federal

Communications Commission as described in Parts 15 and 74 of the FCC regulations.

Authorized users are thereby required to obtain an appropriate license

Sony Electronics Inc.

1 Sony Drive

Park Ridge, NJ 07656 www12 .sony.com/ProAudio

A-1171 (MK10474V1)

Features, design, and specifications are subject to change without notice. All non-metric weights and measurements are approximate.

Sony, XDCAM EX, and DVCAM are trademarks of Sony. HDV and HDV logo are trademarks of Sony Corporation and Victor Company of Japan, Limited (JVC).

Printed in USA (4/08)