Roland SCWS04 manual Recording Audio from SonicCell in Sonar, Selecting Audio to Record

	2	If no unused audio tracks are available in
	If you haven’t yet selected a patch on SonicCell to play from this track,	the project, right-click below the project’s
	use the SonicCell Editor to assign the desired patch to the part you	tracks, and select Insert Audio Track from the
	want to use. Once you’ve done that, return to the MIDI track you’ve	popup.
	been setting up.	Click the audio track to select it, and then its
	3
7	When you play your controller with your new track selected, you	the Restore Strip Size button to reveal the
		track’s settings.
	should hear the desired patch play in SonicCell.

8Record your SonicCell track as you would any other SONAR track— when you play it back, you’ll hear its SonicCell patch play. (You can shrink the track vertically by clicking its Minimize Track button once you’re done with it.)

9	Repeat Steps 2-8 for other SonicCell tracks you want to sequence.	Click the track’s Input popup arrow and select the SonicCell output
	4
	At this point, your track is sequenced, and you’ll hear it each time you	from which you want to record. To record
		• a mic or instrument connected to SonicCell’s Neutrik input jack—
	play your project, including when you edit the track. However, the
		select Left Roland SonicCell IN L.
	sound is still coming from SonicCell itself—it hasn’t yet been recorded
	as an audio track in SONAR. We’ll get to that in the next section.

Recording Audio from SonicCell in SONAR

• a stereo device connected to SonicCell’s Neutrik and (LINE) R input

		jacks—selectStereo Roland SonicCell IN L.
	If you haven’t yet read the Using SonicCell as an Audio Interface	• a SonicCell synth patch in stereo—selectStereo Roland SonicCell
	Workshop booklet, read it now before proceeding. SonicCell offers lots
		IN L.
	of audio-interface options you’ll want to know about.
		Make sure the track’s Output is set to Roland SonicCell OUT L. When
5
Setting Up an Audio Track for Recording		you’re done, the track’s settings should look like this:

Selecting Audio to Record

1Open the project you want to work on, or create a new one.

You can spot audio tracks by the waveform icon to the left of a track’s name.

7