Pioneer VSX-21 manual Analog

Page 55

 

 

 

Additional Information

 

 

 

 

 

 

 

 

 

 

 

 

Symptom

 

Cause

Remedy

 

 

 

 

Broadcast stations cannot be selected

•

Weak radio signals.

• Connect an outdoor antenna (refer

automatically.

 

 

to page 8).

 

 

 

 

No sound from surround or center

•

Speaker settings are incorrect.

• Refer to “SPEAKER setting mode”

speakers.

 

 

on page 17 to check the speaker

 

•

The rear and/or center levels are

settings.

 

• Refer to “Setting the volume level

 

 

turned down.

of each channel” on page 21 to

 

•

The surround and/or center

check the speaker levels.

 

• Connect the speakers (refer to

 

 

speakers are disconnected.

page 13).

 

 

 

 

Sound is produced from other

•

SIGNAL SELECT is set incorrectly.

• Set SIGNAL SELECT to ”DIGITAL” or

components, but not from LD or DVD

 

 

”ANALOG” according to the type of

player.

•

The digital inputs are assigned

connections made (refer to page 29).

 

• Set the digital input settings

 

 

incorrectly, or not at all.

correctly (refer to page 16, 20, 21).

 

 

 

No sound is output or a noise is

• SIGNAL SELECT is set to

• Make digital connections (refer to

output when software with DTS is

 

“ANALOG”.

page 11) and set SIGNAL SELECT

played back.

• A DVD player not compatible with

to “DIGITAL” (refer to page 29).

 

• Refer to the instruction manual

 

 

DTS is used, or the setting of the

supplied with the DVD player.

 

 

DVD player is incorrect.

 

 

• The digital output level is adjusted

• Set the digital volume level of the

 

 

on a CD player or other component

player to full, or to the neutral

 

 

equipped with digital output level

position.

 

 

adjustment capability. (The DTS

 

 

 

signal has been altered by the

 

 

 

player, and cannot be read.)

 

 

 

 

 

The sound is output intermittently

•

The overload indicator is lighting

• Set the ADVANCED THEATER

when software with DTS is played

 

(refer to page 24).

mode to STANDARD (refer to page

back.

 

 

32).

 

 

 

 

When a search is performed by a

•

The search function performed by

• This is not a malfunction, but be

DTS compatible CD player during

 

the player slightly alters the digital

sure to turn the volume down to

playback, noise is output.

 

information, making it unreadable.

prevent the output of loud noise

 

 

 

from your speakers.

 

 

 

 

Cannot be remote controlled.

•

The remote control batteries have

• Replace the batteries (refer to page 6).

 

 

worn out.

 

 

• Too far away or bad angle of

• Operate within 23 feet (7 m), 30° of

 

 

operation.

the remote sensor on the front

 

• There is an obstacle between the

panel (refer to page 7).

 

• Remove the obstacle or operate

 

 

receiver and the remote control.

from another position.

 

• Strong light such as fluorescent

• Avoid exposing the remote sensor

 

 

light is shining onto the unit's

on the front panel to direct light.

 

 

remote control signal light-

 

 

 

receiving window.

 

 

• A cord is connected to the

• Connect cord to the correct jack.

 

 

CONTROL IN terminal on this unit.

 

 

 

 

 

The display is dark.

•

The FL DIMMER button is pushed.

• Press FL DIMMER on the remote

 

 

 

control repeatedly to return to the

 

 

 

default.

If the unit does not operate normally due to external effects such as static electricity

Disconnect the power plug from the outlet and insert again to return to normal operating conditions.

55

<ARB7181>

Page 54 Page 56
Image 55
Page 54 Page 56
Contents VSX-21 Information to User For Canadian modelImportant Safety Instructions Features Table of Contents Introductory Information Checking the Supplied AccessoriesHow to Use This Manual Preparing the Remote ControlOperating other Pioneer components Receiver InstallationWhen Making Cable Connections Operating range of remote control unitConnections Using external antennasAntennas MD recorder CD player Cassette deck placementAudio Components Connections Audio cordsFront Video Components ConnectionsAudio/Video cords Optical cable When playing LD recorded in Dolby DigitalDigital Connections Digital audio cords/Optical cablesComponents equipped with 5.1 channel analogue output jacks DVD 5.1 Channel ConnectionFront Speakers Center Speaker Surround Speakers Powered Sub WooferSpeakers Speaker terminalsFor front channel Connecting additional amplifiersAudio Speaker placement Preparations Setting Up for Surround SoundPress % or fi to set the surround speaker Speaker setting modePress % or fi to set the front speaker Press % or fi to set the center speakerPress % or fi to select sub woofer on or OFF SUB Woofer ON/OFF setting modeCrossover frequency setting mode LFE attenuator setting modeSurround speaker distance setting mode Low cut filter ON/OFF setting modeFront speaker distance setting mode Center speaker distance setting modeOptical digital input 2 setting Dynamic range control setting modeCoaxial digital input setting Optical digital input 1 settingPress Optical digital input 3 settingPress % or fi to set the optical digital input 3 DVD, TV, CD MD, VCRRecalling preset codes Setting Up the Remote ControlTo cancel the preset mode Press Commander SET UP to exit the preset mode Clearing the Remote Control SettingsDisplay Names of Parts and Basic OperationsRemote Control Front Panel Master Volume Surround modes Sound Modes7 8 SIG.SELECT Switching ANALOG/DIGITAL Signal InputPlaying Sources with Dolby Digital or DTS Sound Press to switch the Dolby/DTS mode onSelect the sound mode Selecting a Sound ModeSurrround operation CN.LEVEL Switching the Dolby/DTS mode Advanced Theater modeDVD 5.1ch input playback Using Cinema Re-EQPress Digital NR on the front panel Reducing noise during playback Digital NR functionPress Midnight Listening in Midnight Listening Mode3 4 Midnight Tuner Operations Automatic and Manual TuningMPX Mode Adjust the volumeDirect Tuning Press Memory to activate the memory function Using the front panelMemorizing Frequently Tuned Stations Tune in the station you want to have memorizedRecalling the Memorized Stations Using the remote controlPlayback Other OperationsPress Treble +/- to adjust the high frequencies Adjusting bass and treble tone controlAdjusting the brightness of the display Press Bass +/- to adjust the low frequenciesPrepare the program source Recording from Audio ComponentsRecord monitor Tape 2 Monitor Select the component you want to recordPlayback from the source component Recording from Video ComponentsInsert a blank tape into the video tape recorder VCR Start recording on the video tape recorder, then start+10 Remote Controlling Other ComponentsDVD or LD player operations MenuChannel + TV operationsTV Func VOL +Disc Menu SAT Satellite Tuner operationsEnter ˜¢ GuidePress to stop playback CD player operationsTo start recording MD recorder operationsButton Cassette deck operationsButton ¡ TV/VCR VCR operations+10 Enter Perform the desired operations Press Mode Check to display the current operation modeBackground Control of Other Components Select a component, then start playbackComparison with Dolby Pro Logic Surround Additional InformationDolby Digital Laser disc formatSurround Dolby DigitalDTS Dolby Pro LogicAM broadcasts TroubleshootingSymptom Cause Remedy FM broadcastsAnalog Preset Code List Specifications Maintenance of External Surfaces Power cord CautionEIA 0 4 2 1 1 4 0 99A00ZF0D00 Printed

VSX-21 specifications

The Pioneer VSX-21 is a high-performance AV receiver that caters to both audiophiles and home theater enthusiasts. Known for its robust features, advanced technologies, and solid build quality, the VSX-21 offers an immersive audio-visual experience that enhances any entertainment setup.

One of the standout features of the VSX-21 is its support for multichannel audio formats. It is equipped with Dolby TrueHD and DTS-HD Master Audio, allowing users to experience high-definition sound that matches the quality of high-definition video. This capability make the VSX-21 an excellent choice for those who want to enjoy movies and music in their most dynamic and powerful form.

In terms of connectivity, the VSX-21 includes multiple HDMI inputs, offering seamless integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. With support for 4K pass-through, it ensures that users can enjoy ultra-high-definition content without sacrificing image quality. Additionally, the receiver features an advanced HDMI switching capability, enabling users to easily switch between different sources with just a single remote control.

Another significant characteristic of the Pioneer VSX-21 is its powerful amplification. With a significant output power, it can drive a wide variety of speakers, delivering rich sound even at high volumes. The receiver's Class D3 amplification technology further optimizes power efficiency, reducing energy consumption while maintaining impressive audio performance.

The VSX-21 also incorporates advanced audio calibration technology, such as Pioneer’s MCACC (Multi-Channel Acoustic Calibration System). This system automatically adjusts the audio settings based on the room’s acoustics, ensuring optimal sound quality regardless of the space in which the receiver is placed.

The user interface of the VSX-21 is intuitive, featuring an easy-to-navigate menu system that allows users to customize their audio and video settings. The front panel is well-designed, featuring direct access buttons and a large display that simplifies operation.

In summary, the Pioneer VSX-21 stands out in the crowded AV receiver market with its combination of advanced audio technologies, versatile connectivity options, and smart features such as audio calibration. It is a compelling choice for anyone looking to create an exceptional home theater system or simply elevate their music listening experience. With its ability to deliver cinematic sound and visual brilliance, the VSX-21 remains a reliable and high-performing component in any modern entertainment setup.
Top Page Image Contents