LC265i-IP/LC80i-IP Specifications Connections

LC265i-IP/LC80i-IP Specifications (continued)

Connections

Wire Recommendations

Network Line

Shielded Cat5e or Cat6 cable with RJ-45 connectors. Wiring term- ination convention should be the same at both ends of the cable.

COMM Line

Shielded Cat5e or Cat6 cable with RJ-45 connectors. Wiring term- ination convention should be the same at both ends of the cable.

Analog Line

Low capacitance multi-stranded RCA shielded cable, or speaker wire with speaker-level-to-line-level transformer (such as the PAC SNI-35).

USB Connection

USB 1.1, 5-wire, USB to mini-USB cable.

Power Lines

These recommendations are for all connections from the power supply to each speaker. 14/4 is recommended for all applications. If this is not possible, refer to this chart:

Wire length	Wire gauge/
	# of Conductors
<50’	16/2
50-100’	16/4
>100’	14/4

Network Decoder Card

See Owner’s Manual for installation instructions

Amplifier Connections

Eurostyle

RCA (Phoenix)

Power In

COMM	Tweeter
Network In

LCi-IP speakers are designed for use with analog and digital systems. The speakers perform equally well in either mode, though the digital mode offers greater control functionality. Speaker-level-to-line-level adapters are available for legacy analog systems where speaker wire is already run, allowing connection to RCA input of the speaker.

Recommended Configuration

LCi-IP Performance Optimization WizardSM Program

Polk Audio provides the Performance Optimization WizardSM

on CD-ROM. This program enables you to optimize the perform- ance characteristics of Polk Audio LCi-IP speakers specifically to their location in a given room and to the physical characteristics of that room. You can also download the Performance Optimization Wizard from our website (www.polkaudio.com/downloads/po-wizard.exe ).

Walking Through the Room Optimization Choices

•This program can be used for installing and setting up in-wall or in-ceiling LCi-IPspeakers and asks basic configuration and room environment questions (figure1).

Figure 1

Depending on the speaker you’re installing, its location and the room, you may be asked for a series of measurements, including the height of the listening room’s ceiling, distances from walls, ceiling and floor to the speaker(s), as well as vertical and horizontal angles of speakers relative to the listening area. You may also be asked to provide measurements for the height, width, depth and center of the listening area (see the LCi-IP Owner’s Manual for more).

Factory Support

For product support visit our website at www.polkaudio.com or Polk Audio Customer Service: 1-800-377-7655 (Outside US & Canada: 410-358-3600) Monday-Friday, 9:00 AM-6:00 PM EST, polkcs@polkaudio.com

For more information on the LCi-265IP and LCi-80IP log onto http://www.polkaudio.com/downloads/manuals/home/ LCi-265IP LCi-80IP_Manual.pdf.

P o l k A u d i o C u s t o m I n s t a l l P r o d u c t : L C 2 6 5 i - I P , L C 8 0 i - I P

LC265i specifications

The Polk Audio LC265i is an in-wall speaker that promises to deliver high-quality sound while seamlessly blending into your home decor. Designed to provide an immersive audio experience, it features a robust set of technologies and characteristics suitable for music lovers and home theater enthusiasts alike.

One of the standout features of the LC265i is its Dual 6.5-inch Dynamic Balance woofers. These woofers are designed to produce powerful, rich bass without distortion, even at higher volumes. This ensures that every note and beat is delivered with clarity and depth. Complementing the woofers is a 1-inch Silk Dome Tweeter, which provides smooth, detailed high frequencies. Together, these components work to create a balanced audio profile, suitable for various genres of music and movie playback.

The LC265i also integrates Polk's patented Dynamic Balance technology, which helps in minimizing distortion and enhancing overall sound quality. This technology involves a unique process of analyzing the speaker’s performance to optimize the materials and design, ensuring that the speakers perform at their best across all frequencies.

Installation of the LC265i is convenient, thanks to its easy-to-mount design. This speaker comes with a low-profile, paintable grille, allowing users to customize the look to match their home aesthetics. The grille can be painted to blend seamlessly with the wall, making it virtually invisible and maintaining the clean lines of your living space.

This in-wall speaker is also compatible with various home audio setups, making it an excellent choice for multi-room audio systems or theatre systems. Its versatility allows it to be used in both stereo and surround sound configurations, providing flexibility for any audio arrangement.

The LC265i is built with Polk’s commitment to durability and reliability. Constructed with high-quality materials, this speaker is designed to withstand the test of time. Its rugged design makes it suitable even for more demanding environments, providing peace of mind for long-term installation.

In summary, the Polk Audio LC265i is an impressive in-wall speaker that combines advanced technology, robust construction, and aesthetic appeal. With its dynamic performance and customizable design, it is a perfect choice for anyone looking to enhance their audio experience while maintaining an elegant living space. Whether for music, movies, or gaming, the LC265i provides an exceptional audio solution.