Various Operations, Time/Chara, Mode Clear

VARIOUS OPERATIONS

TIME/CHARA

DIRECT CUSTOM buttons

MODE

CLEAR

REPEAT MODE

PGM

CLEAR

DIRECT CUSTOM

CHARA

PUSH ENTER

Jog dial

ABC

DEF

TIME/

DISC/

CHARA

TIME/CHARA

CLEAR

Digitbuttons

GHI

JKL

MNO

TITLE

PQRS

TUV

WXYZ

TITLE

DISPLAY

MODE 1

INPUT

SET

DISC

MARK

TRACK

TITLE

FILE–TYPE CD MECHANISM

DISC SET

SINGLE LOADER

–

DISC +

ACCESS PLAY

UNLOAD

< CURSOR >

OPEN/

DISC (–/+)

KEYBORD

PHONES

LEVEL

4Á¢

INPUT

RANDOM

To program and play only the discs you want to hear (CUSTOM play)

To start playback

This unit lets you program up to 300 of your favorite discs. For example, you can store all the discs of your favorite artist, or some other group of personal selections, and play only those discs.

You can even add other discs to the custom later on.

Also, there are 10 programmable custom files in which you can program any discs you like.

Operation example : Programming discs 3 and 12 in custom file 5

DIRECT CUSTOM

1 2 3

4 5 6

7 8 9

Press DIRECT CUSTOM buttons.

Playback starts from the lowest disc No.

Tips:

•Pressing the direct custom buttons during playback will carry out custom registration of that disc.

OPERATING

BEFORE

1	MODE		In the stop mode, press
1			In the stop mode, press
			the MODE button several
			times to set the custom
(	MODE	)	mode.

2	5	Select the custom num-
0	5	ber with the remote
MARK	JKL

control unit’s digit but- tons.

DISC TRACK	MIN SEC
( 5 )	CUSTOM


• If some disc number appears, press CLEAR.	Blink

•To perform this operation on the main unit, Press direct custom button 5.

3 DEFSelect the disc number

with the remote control unit’s digit buttons.

DISC TRACKMIN SEC

CUSTOM

•The disc number can also be selected with DISC (–/+) or the main unit’s jog dial. In this case, because custom registration will function after approx. 2 seconds, step 4 is not necessary.

4		Press DISC SET.
5	ABC	Repeat steps 3 and 4 to
	ABC

store other discs.

DISC	TRACK	MIN	SEC
		CUSTOM

Checking the numbers of the stored discs.

Remote control unit operation.

Press TIME/CHARA repeatedly (3 times) during stop mode so that the display changes as shown below. Press DISC(–/+). Each time you press DISC(–/+), a disc number stored in the CUSTOM file is displayed. When all the disc numbers have been displayed, the disc number changes to a blank. (To perform this operation on the main unit, turn the jog dial clockwise.)

DISC

CUSTOM

Pressing the front panel’s CLEAR button during the custom mode will cancel the displayed disc number from the custom file.

•When the jog dial is used during custom playback, only the discs stored in the custom file can be selected.

•If you use the digit buttons and DISC during CUSTOM playback to choose a disc not stored in the CUSTOM file, “NO DISC” will be displayed for approximately 3 seconds.

•When a disc appointed to the CUSTOM file is not loaded in the rack, “NO DISC” is displayed for approximately 3 seconds, the disc is erased from memory, and CUSTOM searches for the next disc.

•The discs stored in the CUSTOM file will not be erased when you turn off the power.

•When another PD-F1039 is connected to create a 602-disc changer, 20 custom files can be programmed. Note however that only discs loaded in the first PD-F1039 can be programmed in custom files 1 to 10, and only discs loaded in the second PD- F1039 can be programmed in custom files 11 to 20.

(Memory Back-Up Function)

Memorized data will be stored in memory for approx. 1 month even if the power cord is unplugged. However, this period may be shortened somewhat, depending on the amount of memory used.

BASIC OPERATIONS

OPERATIONS	VARIOUS