Roland FP-2 Changing the Effect Type, Works of the Soft PedalFC2, Works of the Sostenuto PedalFC1

Page 40

Chapter 4 Other Functions

fig.04-02

Works of the Soft Pedal(FC2)

When the instrument is turned on, this is set to function as a

soft pedal.

1.Switch to Function mode (p. 38), and press the [Strings/Pad] button.

2.Press the [-] or [+] button to select the pedal function.

Works of the Sostenuto

Pedal(FC1)

When the instrument is turned on, this is set to function as a

sostenuto pedal.

1.Switch to Function mode (p. 38), and press the [Voice/GM2] button.

2.Press the [-] or [+] button to select the pedal function.

Changing the Effect Type

1.Switch to Function mode (p. 38), and press the [Effects] button.

The effect number appears in the display.

fig.01-22

2.Press the [-] or [+] button to select the effect.

You can select from the following.

Indi-

Effects

Description

cation

 

 

 

 

 

 

 

 

 

 

When you depress the damper

 

 

pedal on an acoustic piano, the

 

SYMPATHETIC

sound from the strings that

S.rE

were struck resonates with

RESONANCE

 

other strings, adding rich rever-

 

 

 

 

berations and broadness to the

 

 

sound.

 

 

 

 

 

This controls the overtone

Enh

ENHANCER

structure of the high frequen-

cies, adding sparkle and tight-

 

 

 

 

ness to the sound.

 

 

 

dLy

DELAY

This effect adds a delay sound

like an echo.

 

 

 

 

 

 

 

You can give the sound greater

Cho

CHORUS

dimension, with more fatness

 

 

and breath.

 

 

 

 

TREMOLO

This effect is Chorus effect with

t.ch

added cyclic modulation of vol-

CHORUS

 

ume.

 

 

 

 

 

 

 

This effect adds spinning

rot

ROTARY

sounds similar to the sound of

an organ using a rotating

 

 

 

 

speaker of the past.

 

 

 

 

 

This effect adds a phase-shifted

 

 

sound to the direct sound, pro-

Pha

PHASER

ducing a twisting modulation

 

 

that creates spaciousness and

 

 

depth.

 

 

 

 

 

This effect produces a metallic

FLn

FLANGER

resonance that rises and falls

like a jet airplane taking off or

 

 

 

 

landing.

 

 

 

 

 

This effect creates a soft distor-

Odr

OVERDRIVE

tion similar to that produced by

 

 

vacuum tube amplifiers.

 

 

 

 

 

This effect produces a more

dSt

DISTORTION

intense distortion than Over-

 

 

drive.

 

 

 

40

Image 40
Contents Main Features Stylish, Light, Compact DesignDo not open or modify in any way the unit or its AC adaptor Protect the unit from strong impact. Do not drop it Power Supply PlacementMaintenance Additional PrecautionsContents Panel Descriptions Front PanelRear Panel Panel DescriptionsConnect the supplied Power Cord to the supplied AC adaptor Before You PlayMaking Connections Before you begin making connections, confirm the followingUsing the stand Installing the Music StandConnecting Pedals Turning the Power On and Off Adjusting the Sound’s Volume and BrillianceConnecting Headphones Turning On the PowerPlaying the Keyboard Listening to Demo SongsHold down the Reverb button and press the Effects button Voice/GM2 SctPlaying Back All Songs Continuously All Song Play Listening to Internal SongsPlaying the Keyboard Page Press one of the Tone buttons to choose a Tone Group Performing with a Variety of SoundsPress the or + button to select a Tone from the Tone Group Performing With Two Layered Tones Dual Play Changing the Tone variationsHold down the Piano button and press the Strings/Pad Button To exit Dual Play, press either Tone buttonPress the Piano button Press the Split button, getting its indicator to lightTo exit Split Play, press the Split button once more Changing Tone Group and Tone Variation Changing the Lower ToneUse the Balance knob to adjust the volume balance Changing the Volume Balance for Dual Play and Split PlayChanging the Keyboard’s Split Point Changing the Keyboard’s Touch Hold down the Effects button and press the Transpose ButtonPress the or + buttons to select the touch Press the Effects button or the Transpose buttonChanging the Velocity When the Key Touch Is Set to Fixed Press the Reverb button, getting its indicator to light Adding Reverberation to Sounds The Reverb EffectChanging the Depth of Reverb Effect Hold down the Reverb button and press the or + ButtonPress the Effects button, getting its indicator to light Adding a Variety Effects to the SoundChanging the Depth of Effect Hold down the Effects button and press the or + buttonPress the Organ button and select the organ tone Transposing the Key of the Keyboard Key Transpose Press the corresponding keyChanging the Volume Using the MetronomeChanging the Tempo Boosting the Low-Frequency Range Sound Control Changing the Tonal Quality Equalizer21,3 Press the Equalizer buttonWhat is Session Partner? Playing Along with RhythmsPerforming Along With Session Partner Playing Along with RhythmsPress the Start/Stop button While holding down the Part button, press the or + buttonSelecting a Rhythm Selecting PartsPress the Part button Press the or + button to select the RhythmChanging a Rhythm’s Tempo Press the or + buttons to adjust the tempoSelecting a Rhythm’s Chord Progression To stop the Rhythm, press the Start/Stop button To exit, press the Chord Progression buttonRecording the Chord Progression Chord Progression Hold down the Chord Progression button and press Rec buttonStoring Settings Setup Selecting Stored SettingsRecording a Performance Recording a PerformancePress the Rec button Recording a Performance Recording a Performance Using Session PartnerPress the Play/Stop button to stop recording Recording Selected Track buttons Recording along with internal songsErasing Recorded Performances Hold down the Display button and press the Rec buttonHow to Make Settings Other FunctionsChanging How the Pedal Effects Are Applied Changing How the Pedals WorkHow the Soft PedalFC2 effects are applied How the Sostenuto PedalFC1 effects are appliedSwitch to Function mode p , and press the Effects button Changing the Effect TypeWorks of the Soft PedalFC2 Works of the Sostenuto PedalFC1Setting the Part to Which Effects Are Added Tuning to Other Instruments’ Pitches Master TuningSwitch to Function mode p , and press Piano button Changing the Pitch Lower Tone in Octave Steps Octave ShiftAdjusting the Tuning Temperament Switch to Function mode p , and press Transpose buttonChanging the Beat Metronome Press the or + button to change the temperamentSetting the Intro and Ending On or Off Setting the Root Note of the Chord ProgressionSetting the Chord Display On or Off Fixing a Set Chord ProgressionChanging the Equalizer Settings Connecting to Audio EquipmentConnection Examples GainConnecting to the USB Connector About the FP-2 Sound GeneratorConnecting Midi Devices ConnectorsHow to Enjoy Midi Making the ConnectionsMidi Settings Midi Send Channel SettingsSwitching Local Control On and Off Press the or + button to select the transmission channelSetting the Midi Out Mode Using the Pedal to Switch Setup Pedal shiftPress the or + button to switch Local Control on and off Press the or + button to select the Midi Out ModeUsing the V-LINK function How to Use the V-LINKPress the or + button to select pedal setting Stop the external sequencerMaking the Settings for the USB Driver Turn on the power once againAdjust the volume Disabling Everything Except Piano Play Panel LockTroubleshooting Case Cause/What to doTroubleshooting SticksError Messages/Other Messages Display MeaningTone List OrganTone List Rhythm Set List Pop Drum Set Jazz Drum Set Vox Drum Set House Drum SetGM2 Room Set GM2 Power Set GM2 Electric Set GM2 Jazz Set GM2 Brush Set Rhythm List Genre Chord Beat Progression Pattern NoChord Progression Pattern List Chord ProgressionChord Progression Pattern List Chord Fingering List DM7Chord Fingering List GM7 AM7 Internal Song List → Listening to Demo Songs pInternal Song List Stored Settings Settings Stored in the SetupNot Stored Settings Easy Operation List You want to ButtonsEasy Operation List Mode 3, 4M=1 Active Sense ResetFunction ModeMain Specifications Index Index Session Partner 27-28Information Africa03458634 ’04-12-4N For Canada