Making connections
Working with a computer or sequencer
If you want to use the
Using headphones
The
(1)Plug the headphones into the [PHONES] jack located on the
Computer or sequencer (records and transmits MIDI messages)
USB port
USB port
MIDI OUT
Note: Use stereo headphones. Please use only Roland headphones. Headphones from other manufacturers may
MIDI IN
Module, synthesizer, etc. (receives MIDI messages)
(Not necessary when you are using the
Note: The
be unable to provide sufficient volume.
(2)The headphone volume can be adjusted with the
[VOLUME] knob.
Some notes on using headphones
•To prevent damage to the cord, handle the head- phones only by the headset or the plug.
•Connecting headphones when the volume of con- nected equipment is turned up may result in damage to the headphones. Lower the volume on the
•Listening at excessively high volume levels will not only damage the headphones, but may also cause hearing loss. Use the headphones at a moderate vol- ume level.
16