Roland 2 manual Step Recording a Song Track

Page 19

Once you’ve got the Song Rec Standby parameters set as desired—and the SONG REC button’s flashing—you’re ready to record. What happens when you proceed to the next step depends on how you’ve set the Count In parameter above. If you’ve set it to

•OFF—recording will start immediately.

•1MEAS or 2MEAS—your count-in beats will play, and then recording will begin.

•WAIT NOTE—the GW-8 will wait for you to play, and when you do, recording will begin.

Once you’ve set the Song Rec Standby parameters, you’re ready to record.

1 Press the START/STOP button and record your playing.

2When you’re done, hit START/STOP once more to stop recording.

The GW-8 automatically rewinds to the beginning of the song for you.

3To hear what you’ve recorded, press START/STOP again—the button flashes during playback.

If you don’t like what you played, you can erase the track as described on Page 24 of this booklet, or initialize the song again as described on Page 16 if it’s your song’s first track.

To record additional tracks in realtime, whether you’ve started your song from scratch, started it with a style, or are working with an SMF you’ve imported into the GW-8:

1 Press PART VIEW to display the SONG TRACK screen.

2Select an unused track/part, and select the desired tone for the part. (If your song uses a style, be sure to avoid track/parts used by the style, as shown in the table on Page 23 of the GW-8 Version 2 Supplementary Manual.)

3 Press SONG REC so it flashes, and then set the Song Rec Standby parameters as desired. (Don’t forget about Auto Punch if you’re fixing a track!)

4 Record your new track by pressing START/STOP.

Step Recording a Song Track

Step recording is a process that allows you to enter a song’s notes when the song isn’t actually playing. It’s a great way to record impossible-to-play phrases, or to enter notes from a written score.

In step recording, each time you strike a key or chord on the keyboard, the GW-8 records what you played and moves you forward by a specified length of time, called a “step.” Once you’ve moved forward, you can play something else, and so on, until the track’s fully recorded.

When you’ve set REC TYPE to STEP REC on the Song Rec Standby screen, you’re presented with step-recording parameters.

The following parameters allow you to set up your step-recording session:

•PART—selects the track/part you’ll be recording.

•TONE—sets the sound the part uses. Highlight this parameter and select the desired tone for your track using the tone buttons and VALUE dial, or by using the GW-8’s Numeric-entry feature.

•Rec Mode—sets what happens to anything already on the track. You can set it to

•REPLACE—so new notes replace anything already on the track.

•MIX—so new notes are added to what’s already on the track.

•Octave—provides a fast and easy way to shift what you record up or down by octaves, as desired.

•Start—sets the song location at which recording is to start when you’re adding material to a partially recorded song.

There are three settings to Start:

•MEAS (for “measure”)—selects the measure at which recording starts.

•BEAT—picks the starting beat within the selected measure.

•TICK—chooses the starting location within the selected beat.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents GW-8ReleaseNote About This Booklet Updating to Version Getting Ready to Update Your GW-8Understanding the Symbols in This Booklet About ReleaseNote DocumentsBacking Up Your GW-8 Music and Settings Downloading the Version 2 UpdaterUSB memory stick Preparing the Updater FilePerforming the Update Updating Your GW-8 to Version What You NeedStyle Finder What’s New In Version 2?Style Enhancements New Ways to Play Styles Quick Rhythm ToggleGetting to the NTA Parameters Recording Division Selections Into an External Device Selecting Chords Using NTASelecting Styles Using NTA New Chord Detection ControlDivisions New World StylesRecording Styles Understanding the Structure of a StyleRecording Style Tracks Setting Up for a New StyleRecording a New Style Style PartsAccompaniment 5 ACC5 Recording a Style Track in RealtimePage Step Recording a Style Track EZ Convert Editing Individual Style Track EventsMixing Styles in Version Muting and Soloing Style TracksRecording a New Song Setting the Behavior of Style PartsSetting the Levels of Style Parts Song Recorder EnhancementsAbout Song Parts Initializing the GW-8 SongStarting a New Song with a Style Recording a Song Track by Track 16T 32T Recording a Song Track in RealtimeStep Recording a Song Track Page Editing Individual Song and Track Events Mixing Songs in Version Muting and Soloing Song TracksSaving Songs in Version Quantize Parameter What It Sets Range Edit Tools and Their SettingsNew Style Track and Song Track Editing Tools QuantizeErase Parameter What It Sets Range EraseCopy DeleteCopy Delete Parameter What It Sets RangeTranspose Parameter What It Sets Range TransposeInsert Insert Parameter What It Sets RangeINT1-4 MAIN1-4 FILL1-4 Change VelocityChange Velocity Parameter What It Sets Range Parameter What It SetsGlobal Change Parameter What It Sets Range Change Gate TimeGlobal Change Change Gate Time Parameter What It Sets RangeParameter What It Sets Range Shift ClockGlobal Change Shift Clock Parameter What It Sets Range Pitch BEND-toExclusive Song Track Editing Tools Exclusive Style Track Editing ToolsSelecting the MFX You Want to Use Setting Up Style- and Song-Track MFXRefining the MFX’s Settings Version 2 Style Track and Song-Track MFX EffectsEnd System Pedal Setting
Top Page Image Contents