FOOT CONTROLLER FCV100
2. CONTROL ELEMENTS
Fig. 2.1: FCV100 controls (part 1)
By switching into “NORM” mode, the FCV100 is capable of controlling the volume of two individual musical instruments. Signals from INPUT 1/2 are led to OUTPUT 1/2. In “CV” mode the FCV100 can control modulation and volume levels of other musical instruments by connecting OUTPUT 2 to the volume or modulation input of the instrument. In “CV” mode, when OUTPUT 2 is in use, INPUT/OUTPUT 1 can still be used for controlling the volume of another instrument, similar to “NORM” mode. All connections are made with standard 1/4" TRS plugs.
In “NORM” mode, these jacks are used to feed separate instrument inputs with the FCV100’s input signal. If you only use OUTPUT 2 in “CV” mode, the FCV100 functions as a CV controller.
Turning the MIN VOL control fully clockwise will increase the volume at the minimum setting. This allows you to set the volume range.
You can set the volume level by either turning the volume level control or by pressing the pedal until you reach the desired volume level.
2. CONTROL ELEMENTS | 3 |